This is my first holow form...
Blake Washburn
>It is Walnut. It is sanded to 600 grit and has 3 coats of Waterlox Original then hand buffed. It is fairly hollowed out with the use of my sharpened Allen wrench. Thanks for viewing.
Blake Washburn
Knowledge You Can Build On — Est. 1998
This is my first holow form...
Blake Washburn
>It is Walnut. It is sanded to 600 grit and has 3 coats of Waterlox Original then hand buffed. It is fairly hollowed out with the use of my sharpened Allen wrench. Thanks for viewing.
Blake Washburn
Another Pic...
Blake Washburn
>
Ooooops!
Blake Washburn
>
Re: This is my first holow form...
Ric Taylor
>That looks great! What size is it?
Re: This is my first holow form...
Blake Washburn
>Its about 6 1/2" wide and about 2" tall. The opening is about an inch in diameter. Sorry for not posting that.
Blake Washburn
Excellent job, Blake !
Brad Vietje
>These wide-n-low HF's are tough -- nice job! If your second HF is more like a sphere, or a narrower shape, you'll probably have an easier time making it. Great stuff, Blake.
Safe spinning,
Brad Vietje
Newbury, VT
Re: You picked a very difficult form....
Jamie Donaldson
>... for your first effort, but I guess you found that out! How far into the top edge were you able to reach?
Re: This is my first holow form...
Bill Nichols
>Very nice Blake.
Re: You picked a very difficult form....
Blake Washburn
>I went about 2 1/4 inches back under the opening.
Blake
Re: This is my first holow form...
eliot d
>Fine , fine vessel! But I think it's a kind of "not done" thing not to hollow all the way to the edge all through the vessel. You want it to feel really light when you pick it up. And why stop at 600 grit? For just two more pieces of sand paper you could do 800 and 1000. Try it. Check out that sandpaper from Woodchuckers in Canada.
Still, I'm very impressed that this is your first HF!
This is a beauty!!
gil jones
>
wow, all with a sharpened ..........
Ruth Niles
>Allen Wrench! That's got to be a big wrench to reach 2 1/4" inside, I'm really impressed with that, Blake. Could you post a picture of this tool? I tried sharpening a few allen wrenches for much smaller turnings and they worked good, just never thought of doing something this big with one.
Very nice turning.
I Was Thinking the Same Thing
Barbara Gill, Remlik VA
>That must be a large Allen wrench with a significant handle. I too would love to see a picture of the tool.
OK Blake, we want a pic of the tool!
Carole Valentine
>Get your camera rolling! Speaking of cameras, you ever seen "Home Town Story"?
no
Blake Washburn
>
Pic of hollowing tool I use.
Blake Washburn
>Some people wanted a pic of the hollowing tool I use. This is and old police club I found and drilled a 45 degree angle into it and insterted the Allen Wrench. The width is 1 1/4". The handle is 22" inches long. WOW!
Blake Washburn
Another Pic...
Blake Washburn
>
Re: Another Pic...
Blake Washburn
>
tools
john lucas
>Blake Send me an e-mail. I may be able to help you with some hollowing tools.