Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

turquoise

Posts

turquoise

#1

turquoise

jared

>Hello; I have a couple of walnut bowls roughed out that have some larger voids in them from branches etc. The bowls are 12-14 inches in diameter. Anyway I was looking at them this morning and thinking they might look nice if the voids were filled with turquoise. I have seen pictures of bowls done like that and they looked sharp, especially darker wood like walnut. Anyway, I live in Iowa, a long ways from the desert southwest where turquoise is common. Where can I order some that would be suitable for this purpose? And is epoxy the right thing to fill in around the turquoise with? Thanks in advance Jared

Re: turquoise

#2

JL

Re: turquoise  *LINK*

JL

>


Crushed turquoise

Re: turquoise

#3

Craft Supply has it.

Norm Smith in Nova Scotia

>

Re: turquoise

#4

Re: turquoise

Wally Dickerman in Arizona

>As has been said, Craft Supplies and Arizona Silhouette sell Turquoise and other stones.

I've used Turquoise quite a lot to fill small voids and in cut recesses. Here in Arizona it adds to the sales appeal.

I use epoxy. I mix a paste of small chunks and finely ground turquoise. I apply it with an old knife blade and a dental pick. Don't expect to turn it with turning tools. It's stone. I grind it down to the wood with a disc sander.

Wally

Re: turquoise

#5

Re: turquoise

jared

>Wally: So do you turn the bowl or whatever down to the final shape and thickness and then fill the void with the epoxy/stone mixture and then sand it down? Do you do any sanding on the wood before you fill the void? Thanks Jared

Re: turquoise

#6

Re: turquoise

Wally Dickerman in Arizona

>I turn the outside of the piece, rough turn the inside, then finish turn the outside and sand except for the fine grits. I then apply the turquoise/epoxy paste. The next day, using a disc sander, I grind the excess turquoise down nearly to the wood with 80 or 100 grit, then use a couple of finer grits to the level of the wood. Then I finish sanding the piece.

A suggestion....Go to a hobby shop and buy some blue glitter. (Craft Supplies has it). Add a little to the paste mix. It gives the turquoise some sparkle.

Wally

Re: turquoise

#7

An Example.. 

Wally Dickerman in Arizona

>


img

Re: turquoise

#8

Dick Hines

Re: turquoise

Dick Hines

>I use thin CA glue to glue mine in. Like Wally don't try to use your tools to turn the turquoise down. It is almost as hard as dimond. To all a little color to the turquoise I grind brass key fileings in a coffie bean grinder to make a powder. I CA glue that in also.

Re: turquoise

#9

Re: turquoise

Bill Hale / Woodspinner

>Jared

I do almost the same as Wally but I finish sand and put on a coat of sanding sealer prior to the fill. I also use a gold flake with mine. Dental pik in the gold and add the turquoise, tap it in place and then fill with CA or epoxy. Do a touch up final sand to remove the excess glue and excess stone. Do final finish.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: turquoise

#10

Dick Hines

Re: turquoise

Dick Hines

>Blue lapis works well also. I also use some malachite but am not to fond of the green color.

Re: turquoise

#11

Re: turquoise

john lucas

>I cheat,sort of. I use Inlace either black or clear and use the Inlace turquoise plastic chunks. They don't look exactly like turquiose but do look good and you can turn them with standard turning and sanding tools. I also like the black Inlace with Red chunks. Everyone seems to like them when add that to my mirrors.

Re: turquoise

#12

Re: turquoise

Allen Neighbors

>Jared, I just bought 3 pounds of freshly mined, unstabilized, turquoise from a Colbaugh Processing, in Arizona. $15.00 per pound, minimum order $50.00. The total for the 3 pounds plus the shipping was only $53 and change. You can crush it yourself, easily. I'll post a pic of my crusher, if you like.

Gotta go right now. Will be back at the computer around 11PM, Central time.

Email me, if you like.

Allen

Re: turquoise

#13

Re: turquoise

eliot d

>I've used the Inlace product and sold the piece. I've never used the crushed stones. The Inlace is a snap to use, and I suspect it will look just as good.The inlace has simple instruction in the package.