Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

texturing tool?

Posts

texturing tool?

#1

texturing tool?

K.S.SONG

>Hi

I would like to do texturing on African Blackwood like attached photos 'Queen of Hearts' works(from Delmano).

I found a texturing tool in Woodturnerscatalog.com, but it looks like something different of texturing pattern.

How can I get such texturing pattern of 'Queen of Hearts'?

Any other texturing tools & video tape?

Any advice would be appreciated.

Happy turning~

K.S.SONG /Seoul Korea


img

Re: texturing tool?

#2

Re: texturing tool?

john lucas

>My favorite tool for texturing that looks like the kind in the photo is a Dremel engraver. Not the dremel engraving cutter but the actual motorized engraver that is used to write on metal. Remove the tip and replace it with a rounded over metal tip. I used an old 1/8" drill bit shank but you could easily buy a dremel cutter with 1/8" shank and cut off the tip and round over the "business" end.

To use this just make random scribbling marks, kind of like writing. It works best with dark woods but I like the more subtle appearance on lighter woods.


img

Re: texturing tool?

#3

close up 

john lucas

>


img

Re: texturing tool?

#4

Re: texturing tool?

Russ Babbitt Jr.

>I use this Sorby tool and find it is a bit like the chatter tool in that the pattern is not always predictable. Check the picture I included. If you can see the detail the pattern might be similar. I believe the grain has a lot to do with the pattern achieved.


img

Re: texturing tool?

#5

Re: Thanks!

K.S.SONG

>Dear John lucas & Russ Babbitt Jr.

Thanks a lot for your useful advices.

I will test them.

Enjoy turning

K.S.SONG / SEOUL KOREA