Re: A question that I thought I would never ask
Mark Kauder
>Ron,
I basically agree with Mike. You can do it either way, but it depends on your desired outcome. An application of lacquer first will seal the wood well, so that the other paint will not bleed across the wood. If you want the crafty look, having no finish over the paint, allows the texture of the paint to show. Sometimes a lacquer over the paint will give it too much of a production look.
If it were me, and this is what I used to do when my wife decorated bowls - 1) a thinned 50/50 lacquer applied and then wiped off almost immedately, then applied again and wiped off (just as a sealer), 2) then the Painting, and then 3) The finish application. Test the finish application of lacquer over the same wood with the same paint. Lacquer thinners are strong, and can wrinkle some paints, and to wet an application can make some runn.
Good luck,
Mark