Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

$750 worth of wood

Posts

$750 worth of wood

#1

$750 worth of wood

Mkauder, Phenix City, AL

>One advantage of doing segmented turning, is that I work with wood that is already kiln dried.

The disadvantage of doing the exotics is the expense. Two weeks ago, I went up to Atlanta Wood Products and stocked up on my turning stock. Here is a picture of when I got home. All the wood it 8/4. from Left to right they are - Yellowheart, Canarywood, Walnut, Basswood, Goncalo Alves, and Wenge Not shown in the picture is a piece of Paduak the same size as the Walnut. All told it came to a little over $750. Not all are exotics, obviously, but what I work with.

Thought it might be interesting.

Mark


img

Re: $750 worth of wood

#2

Re: $750 worth of fine looking loading ramps?

Al Crandall (NE of Indy)

>

Re: $750 worth of wood

#3

Re: $750 worth of wood

Jennifer@Indy.USA

>Mark.....

I think you need to come shopping up here. That seems a bit much to me? When you're here for the Cincy Symposium we'll have to drag you up to Frank Miller Lumber. You'll go home with double that for the same price.

Jen

Re: $750 worth of wood

#4

Re: $750 worth of wood

john lucas

>Mark I remember buying 1 piece of ebony once that was 2x2 by 3ft and it was $58. I need to take you to Jeffries lumber south of Knoxville. They don't have as much thick wood as AWP but the prices are good.

Re: $750 worth of wood

#5

Re: $750 worth of wood

john lucas

>Mark I was also going to say that apparently I can't calculate board feet in my head. I look at a board, estimate the size, multiply by the cost and say Hey that's not too bad. Then I get to the cash register and it's always about twice what I thought. I write the check pretending that I always spend that much on wood and then walk out of the shop kinda week knee'd thinking man I better make something expensive out of this stuff.

maybe that's why I've gone to making the miniature goblets. You've got enough wood for about 10,000 of them right there.

Re: $750 worth of wood

#6

Wow Mark..

Jim Shaver Oakville, Ont.

>That's a lot of pen blank's!!

I'm glad you have that new bandsaw, these boards will become some of your latest artworks...I can not wait to see how you give them life.

take care,

Jim

Re: $750 worth of wood

#7

7 1/2 cents each to break even, Hmmm..

Barry Irby

>Better get busy.

Sorry, couldn't stand it.

Re: $750 worth of wood

#8

Re: $750 worth of wood

Mkauder, Phenix City, AL

>When I bought this load, I was doing the mental calculation thing, too. When I went to check out, the guy was measuring, and I was telling him what wood it was (like every place, these guys deal more with domestic hardwoods). I thought I had about $700 worth of wood. The bill was $1150!! Not wanting to be a dope, I just handed him my Credit card and sucked it up. Then as I was loading, I saw where the mistake was. I told him that one of the pieces was Tulipwood, 67bf, instead of Canarywood, $7.70bf. A mear $450 difference. I had been lookng at the Tulipwood and wishing I could buy some.

Mark

Re: $750 worth of wood

#9

Re: $750 worth of wood

Mkauder, Phenix City, AL

>Yeah, John, I hear ya. Ebony, that is good and black is usually around $80bf. I know, I bought nearly $1000 worth this year.

Mark

Re: $750 worth of wood

#10

Re: $750 worth of wood

Mkauder, Phenix City, AL

>PS, I am going to use African Blackwood now instead. Btw - what we call African Blackwood, in ancient times was called Ebony.

Mark

Re: $750 worth of wood

#11

Re: $750 worth of wood

Mkauder, Phenix City, AL

>Hmmmm, Maybe I should drive my truck up instead of the car.....

I know that when I go to a local lumber mill, I get Walnut for FAST $3bf,and shorts for $2.50, but it is not planed.

Atlanta Wood Products is pretty good (I thought), You always pay a little more for wood in 8/4 or 12/4 but:

Yellowheart = $8.80bf

Walnut =$10bf

Canarywood = $7.75bf

Wenge = $21.20bf

Basswood = $4.20bf

Goncalo Alves = $22.56bf

This is the same whether I pick it up there of have it shipped to the local outlet. But, by getting it when I am in the area, I get to pick which piece I want, of have what I want cut out of an existing piece.

Mark

Re: $750 worth of wood

#12

Yikes!

Dominic Greco in Richboro PA

>Mark,

That's a SPICY meat-a-ball! :>)

But my my thinking you spent $750 and at the end of the project you'll have a segemented vase thats worth about triple that!

BTW, how many vases/hollowforms will you get out of this haul? I guess it all depends on the size of the turning. But I'm still curious.

Later,

Dominic

Re: $750 worth of wood

#13

Jeffries' Is Worth The Trip.........

Barry Turner

>Most of their pieces of exotic woods are either smaller than I would like to have........or more than I can afford. But they do have quite a selection. On my last trip, I bought a couple of 6" X 6" X 2" blanks of Australian Cypress. Nice wood to turn. Very close grain, silky, waxy feel, sands easily, with a spicy aroma.

Re: $750 worth of wood

#14

Re: Yikes!

David Breth

>Kind of changes the "Ha ha ha, remember it grows on trees!" quip to yourself when you make a lampshade or blast a big piece across the shop.

David B.

Re: $750 worth of wood

#15

Re: $750 worth of wood

Bob Fawcett

>Mark,

Ever turned Sapele?

Want some?

E-mail me. Take nospam out of my address.

I have an abundant supply. I got some at work sealed bids. Its all 6/4 and 8/4 stock. Some of the boards are very wide as well, if thats usefull to you.