Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Jet 1236 Question

Posts

Jet 1236 Question

#1

Jet 1236 Question

David Breth

>Hi -

I've located a Jet 1236 for sale that is unused (in box), and priced noticeably below new. This is one that I have considered for an upgrade from my mid-range mini, would be interested in experience that folks have had with this model.

Thanks -

David B.

Re: Jet 1236 Question

#2

Re: Jet 1236 Question

Mark Mandell - Gone Round In Jersey

>That was my first lathe. Bought it as a floor model at a wood show. Served me well until I outgrew it. Sold it to a friend only because it and Stubby wouldn't fit in the same amount of shop space.

Only comment would be that with a 12" swing, it's not that much of a step up from your mini.

Also plan on adding some meaningful weight to the stand. Dom Greco's modification is in the Articles section listed to the left on your screen.

Re: Jet 1236 Question

#3

Re: Jet 1236 Question

Nick Tuzzolino

>I've had one for about five years and no complaints. I don't try anything big or too fancy, but I built a cabinet underneath and all the tools add enough weight to stabilize it.

Re: Jet 1236 Question

#4

Sounds like the price is right.

Bert Workman

>I had one for a few years and quite liked it. Speed control is quick and easy and I loved the pivoting headstock for buffing etc.

Re: Jet 1236 Question

#5

Re: Sounds like the price is right.

Steven

>I have had one for a few years and not had one problem with it. It will do anything that I have the skills to ask of it. I like the variable speed set up but it does tend to dance if you have a heavy out of balance blank on it.

Re: Jet 1236 Question

#6

Re: Sounds like the price is right.

David Breth

>Thanks very much for the responses. I think this would be a good stepper-upper for me, but in conversation with the owner at my turning club meeting tonight, sounds like I have to wait to see if a deal falls through....

On the plus side, we had our annual auction at the turning club tonight (people bring stuff, proceeds to the club) - got a chatter tool, a nice mahogany blank, and a small burl of unknown lineage for a total of $22.

Thanks once again for the help -

David B.

Re: Jet 1236 Question

#7

Ric Taylor

Re: Jet 1236 Question

Ric Taylor

>David,

Many of us have or have had a Jet 1236. It's a good, reliable machine. They retain their value, so if you ever decide to sell it, you can sell if for close to what you pay for it, if you take good care of it.

Ric

Re: Jet 1236 Question

#8

Re: Jet 1236 Question

Devon Palmer

>I used to have one of those.... lotsa good memories in the old garage having bowls thrown at me becuase I couldn't cut a good dovetail/tenon LOL.

Was my second lathe. The motor seemed to get in the way of my turnings, so I bought a Morse Taper 2 extension for the spur drive - made life a lot easier.