Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Band saw

Posts

Band saw

#1

Band saw

Don in Central Illinis

>I am going to go look at a Harbor Freight 14" BS. The seller said I might be able to get a riser block from Grizzley to fit the HF. Does anyone have any experience with this. Not really drawn to HF but need a BS and the price is right. Please advise. TIA.

Re: Band saw

#2

Re: Band saw

Roger Smith

>Don, I have the HF and put a Jet riser on it. Two problems. One, the blade guard shaft from the Jet riser kit was a larger diameter than the HF. Second problem is that cutting is slow because of the under power motor. Other than that it does an OK job of rounding blanks.

Re: Band saw

#3

Re: Band saw

John Lucas

>Don Been there, tried that. First off there are a several different riser blocks. I know all the 14" bandsaws look like they come from the same factory but the riser blocks are different with locator pins, and different size bolts to hold it together. The guards that cover the blade and the extension for the blade guide are also different. If you somehow knew exactly which one to get it would work fine but other wise I would expect to highly modify it in order to make it work. It can be done. I helped a friend do just that, but it was a lot of work and I still don't know if we got the wheels coplaner front to back. Their close but we didn't have a good way to measure this.

Re: Band saw

#4

Re: Band saw

Dale Stansbery

>Don, I can't answer your question on the riser block, but I will tell you that I had to replace the wheels on mine. They have to be the flimsiest of all the 14' saws, and mine wobbled. I replaced them with jet wheels from Ebay, and now it runs fine. Unless you will be using it for light duty, I'd suggest looking for a saw with more substantial wheels.

Re: Band saw

#5

Re: Band saw

Ron McKinley

>I had a HF bandsaw about 10 years ago. Vibration level was extremely high and it sounded like a threshing machine. Keeping it aligned was always a problem but it worked for the type work I was using it for. For shaping turning blanks it should do O.K. Never tried to add a riser block so can't help you there.......Ron