Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Turning Again!!!

Posts

Turning Again!!!

#1

Turning Again!!!

Mark Mandell - Gone Round In Jersey

>Have been unable to hold/control hollowing tools for some time because of a strange nerve condition in my left shoulder that causes my left arm to go numb with little warning. Turning seemed to aggrevate the issue, especially when hollowing.

Looked at a number of controlled hollowing rigs, but finally decided to design my own. Got it in from the welding shop on Sunday, and have been cleaning up the roughs and such. It's loosely based on the Jamieson set-up, but the 36" capturing rest slides through a clamp on a tool post. This gives 60" of travel along that rear rest and allows for very low angles for entry into a form. The tool holder takes up to a 1" boring bar that's tapered at the tip and drilled to take 1/4" HHS and/or Cobalt cutter bits or 3/8" rod bitholders for bent applications. I can use 3/4" tools with a bushing, and also made a 1"x5" adapter that will hold either 1/2" or 3/8" tool shafts for smaller openings and pieces.

Have some laser pointers on order, but found an el Cheapo mini laser level in the tool box and slaped it on last night to play. Took me all of an hour to hollow most of a 10x6 dry spalted maple jar using my John Jordan hollowers.

Very different from working with a long tool handle "by hand", but I can live with that. And the best thing is it didn't bother my shoulder at all! |;-}}}

When I get the final details done, I'll post a pic or two.

It's good to be making wood dust again!!!

Re: Turning Again!!!

#2

Good for you!

Ron McKinley

>Good for you Mark. Post some pictures of your new rig when you can.....Ron

Re: Turning Again!!!

#3

Re: Turning Again!!!

John Lucas

>Glad your able to continue turning. Captured rigs are a little slower and not as versitile but boy is it easier on the body. I am currently having shoulder problems but not from turning and turning doesn't seem to bother them. Can't throw a ball at all. don't know what caused it but I'm headed back the the weight room this week. That usually solves my problems.

Re: Turning Again!!!

#4

It's old age John

Tony Reynolds somewhere near Newark, Ohio

>I have the same problems. I think mine was too many years as a bricklayer. I also find hitting the weights helps out, plus it improves energy levels.

Tony

Re: Turning Again!!!

#5

Re: Turning Again!!!

Walt Drummond - Middlesex, NJ

>Mark,

Glad to hear you're back at it again. I know from whence you speak about shoulder problems. What's the old saying... Been there, done that. Like John, I had to do the physical therapy route. Ain't gettin' older grand??

I hope to be back in the shop after a little side trip to Marco Island for a little warm sun therapy. :)

See you at the wood show in February??

Re: Turning Again!!!

#6

Re: Turning Again!!!

Allen Neighbors

>That's great to hear, Mark. Go for it. May you never make the inside diameter larger than the outside, and may every piece be a master. :o)

Re: Turning Again!!!

#7

What "Wood Show", Walt?

Ruth Niles

>

Re: Turning Again!!!

#8

Re: What "Wood Show", Walt?

Mark Mandell - Gone Round In Jersey

>Ruth,

That would be "The Woodshows" show that travels 'round to various venues to perpetuate the myth that you can buy tools there cheaper than you can on-line or at your friendly local dealer. Usually hits Somerset, NJ in early Feb. and the similar show should show (up) this month in Valley Forge.

Basically they're the "You need this latest gizmo or you're not a woodworker" kind of thing.

All that said, I did get good deals on my band saw and old lathe.

m

Re: Turning Again!!!

#9

Re: It's old age John

john lucas

>Can't be old age. I'm only 57. :) Young by most turning standards.

Re: Turning Again!!!

#10

Re: Turning Again!!!

Doug Thompson near Cleveland

>I'm glad your turning again... good idea.

Re: Turning Again!!!

#11

Keith Tompkins

Re: Turning Again!!!

Keith Tompkins

>Good news Mark! please show pics of your rig AND your work!

Re: Turning Again!!!

#12

Ric Taylor

What's With the Shoulders? Me Too....

Ric Taylor

>I fell and broke my left wrist a couple of months ago (I won't tell you how). Two weeks later I suddenly had intense pain in my left shoulder and down my arm. All the classic symptoms of a heart attack. Rushed to the emergency room (this was on a ship at sea) and the doctors did a great job of running an EKG and all of the other heart tests on me.

Turns out it was a delay-reaction whiplash injury to the shoulder that happened two weeks earlier when I broke my wrist. Several doctors have told me this is common, that the pain and other symptoms can suddenly show up weeks later. They say this is a big problem in whiplash injury lawsuits, everyone thinks the patient is making it up.

The wrist is fine, the shoulder will take several months to get well.

Ric

Re: Turning Again!!!

#13

Re: Turning Again!!!

W.C. Turner

>Hope it's not Rotator Cuff, that's bad news.

W.C.

Re: Turning Again!!!

#14

Nope

Mark Mandell - Gone Round In Jersey

>Condition is "brachial plexitis" effecting the nerves controlling the arm. Cause is presently unknown, but virus is often suspected, therepy is only marginally effective and may aggrevate it. "Dead-arm" comes and goes. MD says "time will tell," which means he can't.

And so it goes . . . |;-}