Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Just one pen, don't need the shield...

Posts

Just one pen, don't need the shield...

#1

Just one pen, don't need the shield...

Joe Pack

>I rarely post on this board because I don't feel qualified, but I really need to write about this incident.

I have a craft show this coming weekend. I have a good stock of pens, key chains, etc. on hand, but, thanks to a VERY good customer who bought 11 Sierra pens last weekend, I needed to turn a dozen or so for this weekend. I had the blanks cut and epoxied, just needing to quickly turn them and press them together. I figured I could do the dozen in thirty minutes or so, and they were just small things. I really didn't feel like wearing the face shield, and I already had my safety glasses on from sanding/squaring the ends, so I mounted two blanks and fired up the lathe.

Just as I was about to put the gouge to the first blank, I had second thoughts. "Put on your face shield, stupid! You know better!" "Okay," says I, "I'll do it, but I ain't happy about it."

Back to the lathe. Touch the gouge to the first blank, getting in a hurry because I am tired and want to just hog off the material and get it done. BOOM!!! The little 3" blank came apart along an unseen crack, with splinters flying everywhere, peppering my face mask and arms. Sharp little suckers, I found out.

Maybe the safety glasses would have protected my eyes...maybe not. I just know that I won't be likely to find out again. The face shield is a given, now. If I'm too tired to wear it, I'm too tired to be turning. I'll go take a nap.

Re: Just one pen, don't need the shield...

#2

Re: Just one pen, don't need the shield...

Bill Howatt

>Thanks for posting the reminder and I'm glad you did stop to put it on but probably not as glad as you are.

I must admit I've been tempted to do a little job without a shield but so far I've always put it on and after your post, I'll be a bit more certain to do so.

Bill

Re: Just one pen, don't need the shield...

#3

Re: Me, too! Thanks for the reminder.

Allen Neighbors

>Glad you put your mask on!

Re: Just one pen, don't need the shield...

#4

Wonderful things, aren't they!

Scott Hurley in N. VA

>

Re: Just one pen, don't need the shield...

#5

Know how you deel.

Don Henthorn

>I was going to have my first session on the little Jet after my move and then found my shield had been broken in the move. I was tempted to continue but caution prevailed and I put the chisels away. Where is a good place to get a good shield?

Re: Just one pen, don't need the shield...

#6

Harbor Freight, if one is close to you.

Joe Pack

>My best shield is from Harbor Freight. The retail store close to me carries the same brand safety gear (sorry, I can't remember it accurately, but something like "AO") that a local welding shop carries, but at 50%-60% of the welding shop price. Find their safety gear on sale (every 3-4 weeks, it seems...like Sears) and the price can't be beat.