Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

A thoroughly rotten day

Posts

A thoroughly rotten day

#1

A thoroughly rotten day

Bill Grumbine (Kutztown PA)

>It started out well. I had a hollow form of very heavily spalted piece of maple burl on the lathe. It was so punky I had to soak it with Minwax Wood Hardener. It had a huge bark inclusion that ran almost from the top to the bottom. I got it off the lathe and finished and it looks good. But things went to the bad place in a handbasket very quickly.

My next piece was some chestnut I had salvaged from the burn pile, old barn boards. I had it on the lathe long enough to determine that it was too splintery and stained all the way through. Back to the burn pile.

Next up was a roughed out piece of highly figured hard maple. After a short time I determined that it was going to be larger on the inside than the out in two places because of the warping. Another candidate for the burn pile.

So I tromped over to the barn an hauled out a piece of black locust that had the promise of burl in it. It was huge and wet, and weighed close to 70 lbs. I walked it back to the shop (about 200 ft.) and put it on the bandsaw. It turned out to be a huge cat's eye. Firewood pile, but not until next year it is so wet.

Back to the barn, this time with the truck. I am getting tired. Two bona fide burls go into the back, one cherry and one white oak. both are big as they go. I got the cherry on the lathe, and got a nice winged shape going. But the gremlins struck again. The faceplate got stuck on the lathe so hard that it took every ounce of my strength pounding on the tommy bar with a hammer to get the stinking thing off. The lathe and the faceplate survived (I was worried about the spindle for a while) but the bowl cracked. Firewood pile - again.

The white oak burl is still in the truck and it is staying there. No more turning for me today.

Bill

Re: A thoroughly rotten day

#2

Re: A thoroughly rotten day

Jim Shaver Oakville, Ont.

>Bill,

Stuck Chuck?

:-)

Could not resist!!!

Tomorrow is another day my friend....

You know I hae been there!!

Take care,

Jim

Re: A thoroughly rotten day

#3

Re: A thoroughly rotten day

David Breth

>The attacks will continue until the turning stops.

Signed,

The Trees.

Re: A thoroughly rotten day

#4

Re: A thoroughly rotten day

bowlman

>AHHH the joys of woodturning! Been there done that got the T-shirt ... and blood on the wood to back it up. Better luck tomorow.

Somedays we get the bear

Other days the bear gets us.

Re: A thoroughly rotten day

#5

I thought only we mortals had days like this.

Stuart Johnson

>

Re: A thoroughly rotten day

#6

Re: A thoroughly rotten day

David Hammond, in Powder Springs GA

>Terribly sorry Bill! Some days were just never meant for turning... Give it a rest, come back to it tomorrow, and you'll be back to your incredible turning self.

David

Re: A thoroughly rotten day

#7

what is a "cat's eye" ?

Michael Stadulis, in Gloucester County, NJ

>

Re: A thoroughly rotten day

#8

Re: A thoroughly rotten day

Lee Buck

>Bill that's a reminder why most of us just smile when someone says "you should quit your job and sell your work for a living"

Re: A thoroughly rotten day

#9

Very funny Lee

john lucas

>I too laugh when someone tells me the same thing. I've had days like Bill had. Bill I hope tomorrow brings good solid wood with lots of figure.

Re: A thoroughly rotten day

#10

Its a good

Terry Quiram, Roanoke Illinois

>thing that it wasn't your turn to handle the dynamite!!

Re: A thoroughly rotten day

#11

Re: Its a good

Jim Shaver Oakville, Ont.

>LOL Terry.... or pass the soup either!

Take care,

Jim

Re: A thoroughly rotten day

#12

Re: A thoroughly rotten day

Bill Crommett

>No more inside jokes from the Badger Pond ! !

Re: A thoroughly rotten day

#13

Familiar story around here, too.

Doug Trembath

>Bill, my wife finally convinced me that if I blew up two in a row, I had to do something else that day. Whenever I forced my way through it, they'd all be casualties. Of course, the wood is lost, as well.

Knowin' you, your spell of hard luck won't last...

They never do with someone like you...

I left the hospital today after having surgery Saturday on my neck, and can't lift, push, whatever, more than five pounds for a couple of weeks.

Now's the time to get Ted out here and spin some, I guess. Stop by if you're in town.

Doug Trembath

Studio in the Woods

Re: A thoroughly rotten day

#14

Re: A thoroughly rotten day

Bill Grumbine (Kutztown PA)

>Well today is a new day, so we will see what it brings. At the least I have plenty of fuel for the fire.

Jim, believe it or not, I was thinking of you and your chuck incident while I was banging on the faceplate!

Michael, a cat's eye is a growth over an old branch that looks suspiciously like a burl at times. The branch rots out and results in a hollow inside the wood. Most of the time I can spot one before I ever get it on the lathe, but the bark on this locust was so heavy and stringy that I could not see any sort of scab where it had healed around a branch. But as soon as I cut into it on the bandsaw, I saw it for what it was.

Doug, I will be coming your way in about two weeks! The weekend before Thanksgiving I will be out for three days with Turners Anonymous. It worked out well that your club meets just before I need to pick up our daughter at college in Beaver Falls for her Thanksgiving break. Ted is my contact person, host, and I understand we are going to be in his shop for the third day.

Thanks for all of your thoughts everyone. Off to the lathe!

Bill

Re: A thoroughly rotten day

#15

Re: A thoroughly rotten day

Bruce Wiseman

>Sorry about your day, but I always think a bad day at turning is still better than a so called good day at work.

Re: A thoroughly rotten day

#16

Re: Maybe it was the moon Bill!....I had

Jamie Donaldson

>.....several similar events happen yesterday while roughing out blanks from wood stored in the old barn about to be buried. Several big dry walnut crotches with promises of feather grain turned out to have voids, inclusions, and even what appear to have been nails. Of course I had just installed a brand new blade on the bandsaw! Much of it will become firewood, and I gave up on splitting all of it by hand, so today I'm sore and suddenly feeling my age!

Re: A thoroughly rotten day

#17

Re: A thoroughly rotten day

Brodie Brickey

>The bowl or HF may be trashed, but keep in mind that some of that wood can be used for smaller boxes or pen blanks. Not all of it needs to go into the furnace.

Smooth Turnings,

Brodie

Re: A thoroughly rotten day

#18

Re: A thoroughly rotten day

Hooligan

>Man, I feel good. It wasn't just me. I cut a walnut crotch yesterday, that had really gorgeous figure, hollowed it, and was just going to town.

I didn't turn the inside bigger, but I started noticing little hairline cracks all over the piece. While it isn't ruined, it isn't perfect, either. I'll post a pic after bit.

Re: A thoroughly rotten day

#19

Re: A thoroughly rotten day

Hooligan

>Well, the picture stinks, but it works.


img