Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Snakewood tricks?

Posts

Snakewood tricks?

#1

Snakewood tricks?

John Kyler

>I've turned most anywood except snake.

Everyone I know in Colorado that has experience with it, has experienced cracking in pens or other items.

What are the tricks from those that have worked it?

TIA

John

Re: Snakewood tricks?

#2

Re: Snakewood tricks?

Jim Shaver Oakville, Ont.

>Hi John,

CA glue......I have turned it twice, never again.. You turn it down to about nearly finished, then wait for it to crack, usually in a day or so, then CA the cracks and then turn it down again. I used a CA finish on them, it's too much work for a blank in my mind, some people love it..twice was enough for me..

Take care,

Jim

Re: Snakewood tricks?

#3

Re: Snakewood tricks?

RevDoug

>I'm with Jim. Beautiful wood. Never seen a pen of snakewood that did not crack. Granted a couple of them took 6 months to crack, and were probably left in a hot car, but most cracked within a day or two of turning. I do wonder if a pen with a thicker body might work better? At the same time, with the expence of the blanks and the propensity to leave your hard work with an ugly gap down the side, I'll pass on it for pens.

Turn 'em round,

Re: Snakewood tricks?

#4

Re: Snakewood tricks?

Jim King

>John:

I have never worked with Snakewood but we have several woods here that are brittle like glass and impossible to work with. We have found that boiling 4 to 6 hours does something that keeps them from cracking. Out behind the shop we have a 55 gal drum cut in half that we even boil short 1/2 and 3/4 inch boards in before drying to keep them from cracking. I dont know if it will work with Snakewood but I would lean heavily toward yes.