Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

turning a baby rattle

Posts

turning a baby rattle

#1

turning a baby rattle

john from oregon

>My sister called me and told me that my nephew is expecting his first baby. I want to make something for the baby but I'm not sure what wood to use or shape for a rattle to be.

I know I've seen pics and such on turning a baby rattle here, but I am unable to locate them.

Any help would be appreciated,

thank you

John

Re: turning a baby rattle

#2

Re: turning a baby rattle

Don Emmerling

>Hi John,

You might try the website www.nickcookwoodturner.com, as he shows and tells about making rattles. I have seen him in person turn a rattle and it is very simple.

Regards,

Don

Re: turning a baby rattle

#3

Re: turning a baby rattle

adam warachowski

>john,go to woodturningonline.com and click on turning projects.

Re: turning a baby rattle

#4

Ellis Walentine

Warning on baby rattles

Ellis Walentine

>I've made a few baby rattles in the old days, but I gave it up when someone pointed out that if the hollow part breaks, all the rattle stuff -- beans, BBs, whatever -- is there for the baby to swallow. I always figured I could make the walls thick enough that they would be unbreakable, and I could use rattling material that a baby couldn't choke on or get sick with, but I decided it just wasn't worth the constant worry that something could possibly go wrong (remember Murphy?) and that I would be at fault. Call me careful.

How about a mobile or a noisemaker or a pull toy?

Ellis Walentine, Host

Re: turning a baby rattle

#5

Re: Warning on baby rattles

john lucas

>Ellis I used to make captured ring baby rattles until I got concerned about the captured rings breaking and possible being a chocking problem. I quit for the same reason you stated.

Re: turning a baby rattle

#6

Kinda sad and scary

Tony Reynolds somewhere near Newark, Ohio

>I can't think of many products that we produce that can't be abused or misused that would open us up to product liability issues. I don't make bunk beds, baby anything (cradles, changing tables, etc), chairs. Unless you can afford lots of product liability insurance, and who can, with the way the jury system is today you take a risk.

Tony

Re: turning a baby rattle

#7

Re: turning a baby rattle

Chuck Engstrom

>Hi -- I think AAW magazine had an article on a baby rattle a couple of years ago, with a discussion of child safety concerns included. I can't put my hands on it right now but it was, iirc, in the same issue with a Bob Rosand article on Christmas ornaments, about two years ago.

Best--

Chuck Engstrom

Re: turning a baby rattle

#8

Re: Kinda sad and scary

Fred Bearman

>Add into this the fact that the government (here in US) has issued regulations on baby rattles, and I believe that runs like 4 pages, and lists at least 3 specific (and expensive) tests that have to be passed in order to sell a baby rattle. While most of us would use the same care as if it were for our own child, if something would go wrong and those tests had not been performed, the only reason it would even go to court would be to determine the amount of the judgement. That said, I have made and sold a baby rattle or two, but only on the terms that it is a commemorative display only item, and they receive that, and the fact that it does not meet government standards as a baby rattle, in writing with the rattle.

Just my 0.02

Fred Bearman

Port Huron, Michigan

Re: turning a baby rattle

#9

I turned this one for a grandaughter

Don Henthorn

>abought twenty five years ago and she wouldn't let this out of her sight until she was over two years old. Her mother still has it.








Re: turning a baby rattle

#10

Re: turning a baby rattle

Charles R. Smith in Victoria

>It was in the Fall 2004 issue. It is one of the few articles that the AAW has online for general readership. You'll find it at:

http://www.woodturner.org/products/aw/babyrattle_fall04.pdf

Hope that helps. Charles (who is learning to turn) in Victoria

Re: turning a baby rattle

#11

Bob Moffett

Re: Kinda sad and scary

Bob Moffett

>Fred,

I have some friends who wants me to make a baby rattle for their granddaughter. Would you post the disclaimer that you gave out with yours?