Close Quarters Drill
Mkauder, Phenix City, AL
>My Milwaukee Close Quarters CLONE backup drill is dying. Have any of you tried one of these Neiko Drills on EBAY?
If so, what do you think?
Mark
Knowledge You Can Build On — Est. 1998
Close Quarters Drill
Mkauder, Phenix City, AL
>My Milwaukee Close Quarters CLONE backup drill is dying. Have any of you tried one of these Neiko Drills on EBAY?
If so, what do you think?
Mark
Re: Close Quarters Drill
Bob Moffett
>I got one of the close quarter drills from Harbor Freight and then got the 2 year replacement warranty for about $9.99 extra. I figure now I'm good for 2 years. Drill on sale for $29.99 + $9.99 replacement warranty. I am not affiliated with Harbor Freight. I just though this was a good deal.
Re: Close Quarters Drill
Mark Mandell - Gone Round In Jersey
>Maybe it's just me, but I'll pass on any tool where the shipping and handling almost match the price of the item.
IMO, quite buying clones and go for the good stuff. I've had a Sioux 2,500 rpm 3/8" close-quarters for 5 years. I blow it out with air, and check the bearings etc. to keep it clean. I use it almost exclusively for sanding turnings, although it ain't bad for drilling holes in tight spaces. It runs as strong now as when new. Sure, it cost twice as much as the $75 clones, but I expect it'll outlast 3 or 4 of those without my having to wonder if it's going to melt "this time" or whether "I shoulda got two of'em just in case."
|;-}}
Re: Close Quarters Drill
Darryl Hansen
>What part is dying. It is fairly easy to repalce the bearings. If the armature is getting weak that is another matter. Have not tried the NECO but I have both a Milwaukee and a Souix and they have been running great for about 4 years. I also bought another Milwaukee for $69 on ebay and it is also up and running after about 2 years. You should be able to get a Milwaukee new or at least factory rebuilt for less than $75..
We Did That In Infantry Basic Training
Ken Oakley-Sunny St. Cloud, Fla.
>
Re: Close Quarters Drill
Bill Hale / Woodspinner
>Oh yea
Easy to get new bearings but then try to get the armeture and brushes back in. I gave up and sent it to Terry D to put back together.
Bill in Casa Grande, AZ.
Re: That's what I thought, too, Ken. :o)
Allen Neighbors
>
Yeah, but Mark was in Intelligence…
Rod Peterson -- Ormond Beach
>…he might not have had to.
Rod
Re: LOL
Allen Neighbors
>
Re: Close Quarters Drill
Bill Neddow
>I bought a Neiko when my third Milwaukee close quarters drill died. The Milwaukee drills cost close to $250 here in Canada, and getting bearings replaced was costing $80. Tried replacing bearings myself, but when the guts spill out of that machine, they are impossible to put back unless you are really familiar with them. I am not.
Most use I ever got out of a Milwaukee is 10 months. And the 5 year warranty was void because they found dust in it (I did blow them out regularly).
I bought the Neiko for $39 Canadian. It is now 14 months old and going strong.
Re: Close Quarters Drill
Darryl Hansen
>I guess TD didn't send you the diagrams I gave him that show how it is done. The schematics are on the Milwaukee web and there is a notice of how the wires have to be placed to allow the case to close. It is rather easy after you get over the initial frustration. (only took me two weeks the first time :<))) )
Re: Close Quarters Drill
Bob Fawcett
>The picture I see on the WEB looks just like the Harbor Freight with different color plastics. I have a Harbor Freight I bought about 4 months ago. So far it is fine. $29.95
Re: Close Quarters Drill
Mkauder, Phenix City, AL
>Mark,
Cool off buddy ;>)
Notice that this is my BACKUP sanding drill. My current regular is a real Milwaukee Close Quarters drill. I had a clone for a backup, and it came in handy when I sent the Milwaukee to a repair center for new bearings and it took 2 weeks for it to come back.
Mark
Re: Close Quarters Drill
Mkauder, Phenix City, AL
>Yes, I just thought I would try this one. If not satisfactory, I will definately buy a recon Milwaukee. They are all over EBAY.
Mark
Re: Close Quarters Drill
Mkauder, Phenix City, AL
>I forgot to answer your question about problems.
1) A couple of days ago, I grabbed it because it was handy, and when I plugged it in, it hummed, and left plugged in it would get HOT. So I just kept unplugging it.
2) Then the trigger started getting flakey. It would run at only one speed, not variable. Then it would only work in one or two positions and sometime keep running when the trigger was not depressed. I could stop the if I reversed the direction switch.
3) Finally last night it died all together.
Mark
Re: Yeah, but Mark was in Intelligence�
Mkauder, Phenix City, AL
>Oh, Yeah I did. Though we did not use it much in when I would for the NSA, I did use it alot when I was a Platoon Sgt in the 11th ACR's MI Company.
Mark
Re: Close Quarters Drill
Mkauder, Phenix City, AL
>Thanks, Bill.
Mark
Re: Close Quarters Drill
Mkauder, Phenix City, AL
>When I was in Korea back in 1987, I learned that most of the factories that produce the good stuff, after hours make the clones with lesser quality parts.
Mark
Re: Close Quarters Drill
Bob Fawcett
>I had never heard of Neiko before, is it good stuff?
Re: Close Quarters Drill
Darryl Hansen
>Ooops not being an electornics type I would say your armature has gone South. It could also be the brushes that have worn or maybe one has a coating of dust on it. Since it no longer hums I would bet on the armature but they rarely go bad. If you decide to take it apart for a post mortum let me know and I'll e=mail you the schematic that makes it easier to reinstall all the pieces...Darryl
I'm Cool, I'm Cool
Mark Mandell - Gone Round In Jersey
>'cept of course when I'm hot I'm not.
I keep looking at those HF Chi-ka-go 'Lectric deals, but I'd really hate to have some service guy ask me "You paid how much for this and now you want it fixed for free?" and then have to answer him with a straight face. |;-}}}}
I had a rebuilt Milwaukee (the 1,500 variety) and actually replaced the bearings with sealed ones, but it still bit the dust. Maybe it's how the higher rpm Siouxs are made, but it's been bulletproof (so far).