Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Termite Hollowing Tool

Posts

Termite Hollowing Tool

#1

Termite Hollowing Tool

Jim Dickman

>I've been researching hollowing tools. No better way than to ask the experts... Has anyone tried the Termite by Oneway?`Loved it? Hated it? Better options? I'm also looking at Sorby tools. I plan on buying this weekend. Thanks to all of you. I read the questions and replies often - it's really helped me.

Jim D

Re: Termite Hollowing Tool

#2

Re: Termite Hollowing Tool

Steven

>I am looking also and have been for awhile. Just last night I found an article that is most informative. You might even recognize the name of the author. The second page is at the same address but its 2.pdf. Let us know what you decided on.

www.fholder.com/Woodturning/hollow-1.pdf

Re: Termite Hollowing Tool

#3

Re: Termite Hollowing Tool

Wally Dickerman in Arizona

>The termite is an excellent hollowing tool after you've mastered it. It has a definite learning curve which will include some heavy catches. I have one, but after playing around with it a bit, I went back to my Stewart tool. However, I suggest that you visit the website of Herman de Vries www.hdv.net/ Herman uses a termite and hollows vessels as deep as 26 inches with it. He has modified it with a very long, heavy shaft.

Selecting a hollowing tool is a bit challenging because there are so many out there.

Wally

Re: Termite Hollowing Tool

#4

Re: Termite Hollowing Tool

Rick Bane

>I have the termite tool and I love it. I am new to turning and hollow forms but I think its an awsome tool. It does have a learning curve just as with any tool but it doesnt take that long to get the hang of it. The only problem I have with it is it seemd too short for deep hollw forms. I've thought about making a longer handle assembly for the tips to be mounted in, but thats my only complaint!!

Rick

Re: Termite Hollowing Tool

#5

Re: Termite Hollowing Tool

RevDoug

>The termite is my primary hollowing tool. Read the instructions well and make sure you have a router to sharpen with. Many will say that you can sharpen with a drill press, but I found from experience that the higher speed of the router does indeed work better. With a sharp bit, you can do a lot of hollowing in a hurry. BTW, don't forget to clear your shavings often. They will grab hold of your tool and give you quite a hard time.

Turn 'em round,

Re: Termite Hollowing Tool

#6

Re: Termite Hollowing Tool

Bill Howatt

>Very happy with mine but it does have a learning curve. BTW the shavings are not supposed to go through the hole.

Bill

Re: Termite Hollowing Tool

#7

Termite

Jim Dickman

>Thank You Everyone! Helpful

Re: Termite Hollowing Tool

#8

Re: Termite *LINK*

Darrell Feltmate

>JIm

Just a thought here. I have tried the Termite and liked it but (a) I am cheap (b) it has learning curve that not everyone likes after paying for it and (c) I like to make my own tools. So I make a hook tool. Similar to the Termite but mine has high carbon cutters instead of HSS and is a hook instead of a circle. I like it. It cost less than $10.00 so no complaints. There are instructions on my web site if you want to try a hook tool. It may convince you to go for the termite as the turning methods are the same. There are a couple of video clips of it cutting as well which may help that learning curve.


Around the Woods.