Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Planning travel to S. Carolina from Upstate NY

Posts

Planning travel to S. Carolina from Upstate NY

#1

ebd

Planning travel to S. Carolina from Upstate NY

ebd

>From Upstate NY, our general route is going to follow 81 south (jumping on and off Skyline Drive and Blue Ridge Parkway) - In Ashville, NC get on 26 to Charleston, SC - Return trip will be north on 95 through DC & Virginia with a detour (40 & 85) to Farmville, VA.

I'm interested in places that sell exotic wood/burl blanks and those that sell woodworking & woodturning tools that would be along our route. I plan to stop at Packard in N. Carolina. Are there other places I should consider. I'm particularly interested in anything unique or unusual.

Re: Planning travel to S. Carolina from Upstate NY

#2

Re: Planning travel to S. Carolina from Upstate NY

Ruth Niles

>I live right off of 81, about 45 miles south of Harrisburg and there's a fish hatchery down the road from me! Does that count?!?

Seriously, as to wood, there is a place somewhere in the Harrisburg area off 81, and I hope someone posts where they are because I'd love to check out their wood, too.

Packard is the best place to get everything you need for woodturning.

Re: Planning travel to S. Carolina from Upstate NY

#3

Re: Planning travel to S. Carolina from Upstate NY

Gary in Zirconia, NC

>You'll be 5 miles from me as you go east on I26. Stop in if you have time. I'm 15 mile from Packards and about 35 miles form Cormark, north of Asheville. Cormark has exotic woods mostly from Africa.

Re: Planning travel to S. Carolina from Upstate NY

#4

Re: Planning travel to S. Carolina from Upstate NY

Hilel Salomon

>Hi. I practically commute between Columbia, SC and VA (charlottesville and Staunton) so.... For woodworking shops, you will be near several woodcraft shops (Roanoke, Charlotte and Charleston, SC), several Klingspore stores (Hickory, NC) and Charlotte, and within shooting distance of woodworkers' supply. I also heartily recommend Mann's tools in Columbia, SC. The products, prices and people are superb and it is a great place to visit. I can give you directions to Mann's and partial directions to the Charlotte stores if you'd like.

Re: Planning travel to S. Carolina from Upstate NY

#5

Re: Planning travel to S. Carolina from Upstate NY *LINK*

Chuck Engstrom

>Hi -- on your way back up you might want to stop by Exotic Lumber Inc right beside the Chesapeake Bay Bridge on US50 outside Annapolis MD. Then cross the Bay Bridge and go up Rt 301 to pick up I95 again in Delaware -- a much nicer drive than following I95 around Baltimore. Take Route 50 East toward Annpolis off the Capitol Beltway around Washington.

Exotic Lumber has a wonderful warehouse where you are free to look all around -- very casual atmosphere. A room of various blanks for turners also. One of its best features is being less than a 10 second detour off Route 50 from Annapolis to the Bay Bridge and beyond. And nearby is Featherstone Antique Mall, (maybe a 60 second drive from Exotic) where there is one stall full of used tools of all sorts at sensible prices.

Link to Exotic attached.

Have a safe trip.

Best--

Chuck Engstrom

Chestertown MD


Exotic Lumber Inc -- Annapolis MD

Re: Planning travel to S. Carolina from Upstate NY

#6

Re: Planning travel to S. Carolina from Upstate NY

Bob Fawcett

>There is a small sawmill operated by 2 brothers on Orchard Rd at the Upward Rd exit on 26 just south of Hendersonville. They sell mostly rough lumber, but are very accomodating and will cut most anything for you if they have access to it. You can call ahead and they will have whatever ready for you. Now if I can just find the phone number :-).

Maybe Bill Turpin or someone else around there knows their contact info. I think their names are Dan and Don.

Re: Planning travel to S. Carolina from Upstate NY

#7

Re: Planning travel to S. Carolina from Upstate NY

Bob Fawcett

>Here is a google link to it.

http://www.google.com/maps?hl=en&lr=&rls=GGLD,GGLD:2005-17,GGLD:en&q=sawmill&near=Hendersonville,+NC&radius=0.0&latlng=35318611,-82461111,3135958320624365835&sa=X&oi=local&ct=result&cd=2

This link wraps forever, if you can't get that to work, just google sawmill and hendersonville. You want D and D Sawmill Services listed as Flat Rock, NC. The phone number is in the listing. Be sure to call ahead if you plan to go, they keep somewhat irregular hours, but will be there if they know you are coming.

Re: Planning travel to S. Carolina from Upstate NY

#8

Re: Planning travel to S. Carolina from Upstate NY *LINK*

Bill Turpin in WNC mountains

>I bought 2/3 of a five gallon bucket of African blackwood for $5.00 on Friday at Cormark. Seconds, end cuts, but very useful for finials.

Cormark is ten miles above Asheville in a rural area off of US-25.

D and D 828-272-0665. Their junk bins are $3/pound usually but I got about fifteen #.

Bill in WNC mountains


Cormark, Weaverville

Re: Planning travel to S. Carolina from Upstate NY

#9

Re: Planning travel to S. Carolina from Upstate NY

Danny Wells

>I second the motion on visiting Mann's in Columbia. My son lives in Columbia. We found about them the last time we were there, spent a half day in there. Great folks and good prices on lots of machines.

Re: Planning travel to S. Carolina from Upstate NY

#10

Re: Planning travel to S. Carolina from Upstate NY

Steve in NC

>Not sure if you pass near Mayodan, NC, (it is near NC 220 at the VA NC line) be sure to visit Steve Wall Lumber. Great people with a good selection of bowl blanks.

Re: Planning travel to S. Carolina from Upstate NY

#11

ebd

Thanks to all re. NY 2 SC trip

ebd

>I appreciate all the suggestions you guys & gals gave. Thanks loads!!!!