Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Props for Nova lathe USA support

Posts

Props for Nova lathe USA support

#1

Props for Nova lathe USA support

Jim Swank

>The locking handle on my Nova 3000 banjo pulled out last weekend. The threads on the handle were damaged and the hole in the locking bar was egg-shaped.

I called Tim Geist Monday, and had a complete new banjo in my hands Thursday - no argument, no questions, and no charge. I've just emailed him my thanks, but wanted to share this good experience with others too.

Re: Props for Nova lathe USA support

#2

Ditto on Tim Giest

Barry Irby

>The electronic controller on my DVR went bad and I called Tim. He had me fire it up and push a few buttons and when it responded as I said it had, he shipped me a replacement without hesitation. Sent a call tag with it and I put the bad one back in the same box and sent it back. Quick turn around, no argument, no Charge. The controller should not have died, but Tim made it right. If I had another lathe to buy, I would buy a reconditioned one from Tim directly and save about half.

Re: Props for Nova lathe USA support

#3

Dito Here

Dave Belser

>As I've said before Tim does a great job for Teknatool. Nothing but positive experience with support for my Nova.

- Dave

Re: Props for Nova lathe USA support

#4

Re: Props for Nova lathe USA support

Danny Wells

>How does one contact Tim Geist? I would be interested in a refurbished Nova.

Re: Props for Nova lathe USA support

#5

Re: Props for Nova lathe USA support

Jim

>So how much would a refurb Nova cost? I liked the look of them at the IWF, but never turned on one or seen one in action. Had to kid them about not having a turner to demo them. Evidently costs big bucks to have the DC and power for the booth. Those booths are NOT cheap for that show. Even the big companies hesitate to spend money.

Re: Props for Nova lathe USA support

#6

Re: Ditto on Tim Giest

tm

>I just bought one new about 2 weeks ago. Its good to hear they provide that level of support.

tm

Re: Props for Nova lathe USA support

#7

Re: Props for Nova lathe USA support

don lewonczyk

>Hi Danny, you wrote me awhile ago about turkey calls and gave me some advice on the subject. Anyway here is the phone number and e-mail for NOVA LATHES; t.v. gEIST MFG INC, 1-866-748-3025, EMAIL-SERVICE@TEKNATOOL.COM I have the dvr 3000 and like it alot. I added enough bed extentions to give me 60" between centers for walking sticks and added the cast iron leg set. Haven't tried it yet for that but turned a couple of box elder bowls. Still don't know what I'm doing, don't have enough time for practice with the farm work taking priority over everything else. Take Care, Don

Re: Props for Nova lathe USA support

#8

Steven Antonucci

Tim is THE BEST

steve antonucci

>I've had nothing but exceptional support from him. Anyone looking for a great lathe with excellent support should contact him regarding the reconditioned Nova's he sells.

Steve

Re: Props for Nova lathe USA support

#9

Super Nova 2 Chuck Problem

Barry Turner

>I talked with Tim via email and phone regarding a problem I had with a new Super Nova 2 chuck. Apparently, the threaded insert was bad. When I mounted the chuck on my lathe, it wobbled. When I replaced the new insert with an old insert, it no longer wobbled. Well, it was obvious the insert was the problem. I emailed Teknatool and they had Tim contact me. We talked and I related the details to him. He replaced the insert promptly. Problem solved.

Re: Props for Nova lathe USA support

#10

Cast Iron leg set

Gordon Seto

>Hi Don,

Where can you find the cast iron leg set for DVR? Thanks.

Gordon