Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Shallow Black Cherry Bowl

Posts

Shallow Black Cherry Bowl

#1

Shallow Black Cherry Bowl

Mike Brazeau

>This bowl is 14" in diameter by 3" high with textured rim and double beads on the rim. Sanded to 400 and finished with Walnut Oil followed by Beeswax/Mineral oil finish. This is one of two bowls I am contributing for a Nov. 11th Gala and Silent Auction in our community fight against a proposed quarry on the Western edge of the Niagara Escarpment www.stopthequarry.ca The tree had been cut along the concession road in our area in 2003. The rim work was accomplished first using the coarsest Sorby Spiraling Wheel on an angle to texture and then creating the beads using my homemade (from a shock absorber shaft) triple point tool. The texturing was lightly sanded on the lathe. I love that tool. It is a delight to use and rarely leads to the trouble Mr. Skew creates. I was able after my wife's insistence, to even undercut the bead on the interior edge quite deeply. Comments/critique welcome.

Mike


img

Re: Shallow Black Cherry Bowl

#2

Re: Shallow Black Cherry Bowl

Tony Reynolds somewhere near Newark, Ohio

>A very beautiful looking piece!! I hope it does well for the auction.

Tony

Re: Shallow Black Cherry Bowl

#3

Re: Shallow Black Cherry Bowl

Bob Fawcett

>Great looking bowl Mike.

Your favorite tool does a great job. I think you are referring to the 3 point tool. I have to make one of those. Never thought of using a shock absorber shaft. What diameter? Is it from a standard shock or a macpherson strut?

Re: Shallow Black Cherry Bowl

#4

Re: Shallow Black Cherry Bowl

Mike Nelson

>Really nice Mike. You might want to listen to your wife more often! Seems like I've thought that once or twice...better watch it, could become a habit.

Re: Shallow Black Cherry Bowl

#5

Re: Shallow Black Cherry Bowl

Jennifer@Indy.USA

>Mike this really is a lovely bowl. I think the pics look even better over here than at WOW. Your rim rim detail is outstanding. Just lovely!

Jen

Re: Shallow Black Cherry Bowl

#6

Re: Shallow Black Cherry Bowl

Allen Neighbors

>Beautimus, Mike. Hope you stop the quarry.

Re: Shallow Black Cherry Bowl

#7

Triple point or 3 point details

Mike Brazeau

>Thank you Bob. It was a shock absorber and is 7/16" in diameter, which is a bit thick, based on the articles I have read. I followed the article that was in The American Woodturner last fall. To determine the facets, I wrapped with masking tape, cut cross with an Exacto knife, unravelled the tape and divided into three parts with distinct marks, reapplied and used them as a guide to grind. Very simple process and I find touch-ups very easy. Before doing anything critical, I just give it a light touch up on the grinder. There was an article in Woodturning, the UK magazine recently as well on the use of it. V-grooves on bowl bases or beads are a piece of cake with it. Am going to try one from 1/4" drill rod next. I just remembered that I put a bead on the bowl base as well. Did this a few weeks ago, but my camera was in sick bay.

Mike

Re: Shallow Black Cherry Bowl

#8

Re: Shallow Black Cherry Bowl

Mike Brazeau

>Thank you Jennifer. It looks really nice right now on a walnut table in our entrance hall and we are kind of growing fond of it. Will have to try again, as the auction draws near.

Mike

Re: Shallow Black Cherry Bowl

#9

Re: Shallow Black Cherry Bowl

Carole Valentine

>Wonderful piece, Mike! I love the undecut rim. This is the type of piece that frustrates me because I can't see it in person. :) It should bring a tidy sum to fight the quarry.

Re: Shallow Black Cherry Bowl

#10

Escarpment Blues

Jim Shaver Oakville, Ont.

>Beautiful Work Mike,

I love the rim detail!

Have you heard the song about the escarpment by Sarah Harmer, The Escarpment Blues......could be a good theme song for your cause.

Take care,

Jim

Re: Shallow Black Cherry Bowl

#11

Re: Escarpment Blues

Mike Brazeau

>Hi Jim.

Yes, she is spearheading the other quarry fight, which is an expansion of the Nelson Quarry, just north of Burlington. Our chairperson would love to have her on our team.

Mike

Re: Shallow Black Cherry Bowl

#12

Escarpment Blues, Lyrics

Jim Shaver Oakville, Ont.

>ESCARPMENT BLUES

If they blow a hole in my backyard

Everyone is gonna run away

The creeks won�t flow to the Great Lake below

Will the water in the wells still be ok?

We�ll need to build some new apartments

And I know we�re gonna have to fix the roads

But if we blow a hole in the escarpment

The wild ones won�t have anywhere to go

If they blow a hole in the backbone

The one that runs cross the muscles of the land

We might get a load of stone for the road

But I don�t know how much longer we can stand

We�ll keep driving on the Blind Line

If we don�t know where we want to go

Even knowledge that�s sound can get watered down

Truth can get sucked out the car window

We�re two-thirds water

What do we really need?

But sun, showers, soil and seed

We�re two-thirds water

The aquifers provide

Deep down in the rock

There�s a pearl inside

If they blow a hole in the backbone

The one that runs across the muscles of the land

We might get a load of stone for the road

But I don�t know how much longer we can stand.

Re: Shallow Black Cherry Bowl

#13

Re: Shallow Black Cherry Bowl

Mike Brazeau

>Thank you Carole. I just love cherry and the walnut oil sure did the job in popping the grain. Over 2 1/2 years we have raised about $300,000 and spent about $175K on lawyers, digital mapping and technical experts. This event is intended to be a spirit booster for the community as well as a financial one. Making the bowl was a lot more fun than attending our bi-weekly steering committee meetings.

Mike

Re: Shallow Black Cherry Bowl

#14

Re: Shallow Black Cherry Bowl

George Van

>I like everything about this Mike. The beaded and textured rim, the undercut of the rim, overall form and finish choice. I only wish you had posted a larger picture, it's not too late ;-).

Re: Shallow Black Cherry Bowl

#15

Nice Job!

Dominic Greco

>Mike,

I meant to respond to this last night when I forst saw it. But my internet connection went down. Go figure!

Anyway, I wanted to say how much I liked the rim treatment. IMHO it works pefectly with framing the bowl. The texturing gives it a tactile sense that makes me want to pick it up. I think that is a real key to making something that sells. Making it so people WANT to hold it.

It also looks like youreally nailed the shape and finishing on this on. Excellant job.

See ya around,

Dominic

Re: Shallow Black Cherry Bowl

#16

Mike, That Sure Is A Pretty Bowl.

Barbara Gill, Remlik VA

>

Re: Shallow Black Cherry Bowl

#17

Brad Vietje

Re: Shallow Black Cherry Bowl

Brad Vietje

>Mike, that's one fine looking bowl ! The wood seems really dark for Black Cherry, though... looks a lot like some of the lighter Black Walnut I've used. I'm thinking of building a knock-off of the Sorby texturing tool -- maybe I should just buy the real deal.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Shallow Black Cherry Bowl

#18

Re: Shallow Black Cherry Bowl

Mike Brazeau

>Thank you Brad. The bowl has been sitting in an area under one of our skylights for a couple of weeks and has started to darken. This was the first time I had tried Mike Mahoney's walnut oil technique and was very happy. My oil came from LV since they are 20 minutes away and I used a homebrew beeswax/mineral oil I won on our guild raffle table. A much better result than just Beeswax/mineral oil mix that I used on my last cherry bowl. My favorite finish on cherry flat work is heated linseed oil, a technique I learned from Thomas Moser's web site.

I was going to try and make a texturing wheel and had even bought a sprocket at the local TSC but caved in and bought the Sorby for myself for Father's day a couple of years ago. Bit of an expensive toy, but looking promising now that I am actually trying it out.

Mike

Re: Shallow Black Cherry Bowl

#19

Re: Shallow Black Cherry Bowl -request

Wayne Allen - Carson City. Nevada

>Hi Mike -- That is one beautiful piece of work !! Please post a picture of the 3 point tool that you described. Thanks -- Wayne

Re: Shallow Black Cherry Bowl

#20

Looks great! How about a shot from above?

Craig Daymon

>Looks great from this angle. I'd like to see a shot from above looking down to get another angle on your rim details.

Really nice color too.

-Craig

Re: Shallow Black Cherry Bowl

#21

Triple Point or Pyramid Tool *LINK*

Mike Brazeau

>An article in the Fall 2005 issue of the American Woodturner by Stacie Hager detailed how to make the Triple Point tool or Multi Point tool or Pyramid Point and there was a recent article in Woodturning on its use. It is very simple to make. I used a shock absorber shaft. It is ground to a pyramid with three facets and used as a scraper. To determine the grinding positions, I wrapped a piece of masking tape around the shaft near the end to be ground, scored across the seam with an Exacto knife , removed the tape and divided into three equal segments (work in mm�s) with clear marks. Reapply the tape and hold the marks vertical and grind to a full facet, repeating the process twice. I just measured and my angle is about 40 degrees. The shock I used was 7/16� in diameter, but slightly smaller would be better. The AAW video is 5/16� and I seen mention of �� one, which I am going to make soon from a scrap of �� drill rod I have on hand. I did not bother tempering. Jim Shaver, worked in the industry and said the shocks are around a 62 Rockwell. You are only cutting wood.

To make a bead, you first cut a groove using two facets straight on and at center height, then drop the tool handle and gradually work the bead shape from either side. It can also be used for a planing cut or an end cut to dress spindle work. There is a video based on the article at the AAW site, Resources Section under Downloadable Videos http://www.woodturner.org/resources/videos/ . It does complicate the grinding procedure however by involving a hex nut on the shaft. Craft Supplies US sell the Henry Taylor version. Do a search on �pyramid� at their website. I found some good discussion on the tool in the rec.crafts.woodturning group at Google as well.


Craft Supplies - Search for Pyramid

Re: Shallow Black Cherry Bowl

#22

A shot from above

Mike Brazeau

>Thanks Craig. I had actually taken this overhead shot yesterday, but wasn't happy with the result and took one from an angle to better see the beads. It is somewhat difficult to get an even effect on the endgrain and long grain portions with the texturing tool. The long grain is a bit deeper. You just have to work to a compromise. It is important to do this type of thing as soon as you can so that the bowl rim doesn't get out of round. This was a two year old roughout, so was very dry and has really held its shape. I measured yesterday and it is within 1/16" all around.

Mike


img

Re: Shallow Black Cherry Bowl

#23

That is very nice indeed

Ron in Drums PA

>

Re: Shallow Black Cherry Bowl

#24

Thanks Mike, great job.

Craig Daymon

>

Re: Shallow Black Cherry Bowl

#25

Re: Triple point or 3 point details

Bob Fawcett

>Thanks Mike.

I have to try that.