We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>The photo is not very good, and I almost didn't post this because of the picture. The color is off. The wall behind the posts is actually yellow. I have adjusted this some in MS photo editor, but can't seem to get it any better. I think I need to take these outside and shoot in sunlight. I shrank the photo to fit this site and there are some artifacts of the editing.
These are the posts for the bed I am makeing. I am working on the rails now. The headboard is next.
>I turned them in 4 pieces each. The bottom stops just below the large bead about middle of the post. The finial is separate, and there is a joint between the uppper bead details the hopefully you can't see.
The wood is Sapele I got in a sealed bid at work. Leftovers from an aircraft interior. Turns real nice like mahogany. Looks a lot like mahogany too.
Well done! I would hate to ever have to make 4 things identical. It must be VERY difficult. They look awesome from here. What a great project. I made my own bed and it's nothing fancy by any means, but there is some sort of really nice satisfaction every time you climb in a bed that you've made. It's awesome :)
When I started this, that was the part that scared me to death. I had one complete post for a while before I built the rest. I made a story stick for the pieces from the first. I used calipers and the parting tool at strategic places and cut the rest by eye. It wasn't really as difficult as I thought. If you look real close you can see differences, but when I get them separated by a queen size mattress it will be harder to see.