Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Think I need a bigger lathe?

Posts

Think I need a bigger lathe?

#1

Think I need a bigger lathe?

Mike Nelson

>My wife and I picked up a little piece of cottonwood yesterday, with the help of a big forklift. Was worried about the trailer but held up fine going real slow. Now we have to figure out how to get this off the trailer and cut up with a 16" chainsaw that will leave a 6 or 8 inch 'dowel' in the middle of the log!


img

Re: Think I need a bigger lathe?

#2

Re: Think I need a bigger lathe?

Carole Valentine

>Ooooh! From what little I can see, it looks like there is some figure in that baby. Have fun. :)

Re: Think I need a bigger lathe?

#3

Re: Think I need a bigger lathe?

Mike Nelson

>Here is some crotch wood Carole, what do you think, a salad bowl maybe?


img

Re: Think I need a bigger lathe?

#4

Re: Think I need a bigger lathe?

robo hippy

>I have only turned one piece of cottenwood. It smelled like someone threw up and the smell didn't go away as it dried. I heard from some tree people that this was common with cottenwood. I also read that one comercial use for cottenwood was that it was used around horse stalls because it tasted so bad the horses wouldn't chew on it. Does your haul stink, even if it was free?

robo hippy

Re: Think I need a bigger lathe?

#5

Re: Think I need a bigger lathe?

Don in Central Illinis

>Question, how is the best way to cut a crotch piece for bowl turning.

Re: Think I need a bigger lathe?

#6

Think you're going to need a double truss! :)

Bill Howatt

>

Re: Think I need a bigger lathe?

#7

Re: Think I need a bigger lathe?

Rick Allen

>Congradulations!!!

Sounds like a good reason to get a chainsaw with a longer bar.

You can cut a wedge out with the 16" bar and the work the chainsaw in that wedge to get to the middle 8". You will lose some wood cutting the wedge. But it looks like you have a little to spare for the chainsaw gods.

Re: Think I need a bigger lathe?

#8

Aahhh that smell!

Mike Nelson

>robo, That bad? As you can see I've been roughing out a whole bunch of this stuff lately, maybe I'm getting used to the smell. To me it smells kinda like a lot a cows kept in one pen for a week after a rain. My wife doesn't think it smells that good! But is it worth it? Here is a pic of an unfinished HF (needs another coat of oil & buffing) taken from just part of a crotch. After drying and finishing there is no smell, add a little orange oil wax and its down right pleasant.

Don, I ask Barbara Gill that same question, she said you have to finess a good piece out of crotch wood. What I do is cut the two(?) forks paralel with the main trunk then go from there. I rough turn to 1 inch and completely cover the outside, bottom and rim with un-cut white glue. Wait till it quits loosing weight and keep sharpening tools as you turn.


img

Re: Think I need a bigger lathe?

#9

Re: Aahhh that smell!

Mike Nelson

>Another bad pic but you can see why some of us put up with a little 'earthy' smell. ;)


img