Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Tonight's Topic...Different Strokes.....

Posts

Tonight's Topic...Different Strokes.....

#1

Tonight's Topic...Different Strokes.....

T Daniel

>Each of us have different goals, different markets, different skill levels, different backgrounds and certainly different opinions. We are all turners but there is a major difference between those of us who turn for entertainment and those of us who turn to pay the bills or are trying to learn to turn so that at sometime in the future they can earn all or part of their living with turning. There is nothing at all wrong with "finding your own voice", "pushing the limits", experimenting with new techniques, etc. Should I repeat that? Does everyone understand that I am NOT bashing anyone who is attempting to do any or all of those things? On the other hand, there are many who come to WC to learn what they can do to make some bucks with their turnings. We are talking starting points here and I acknowledge emphatically that there are a few who have reached a level with their own style that allows them to sell their items at a high enough price to justify the time they have put into each piece; however, this group is in the minority and most of us will never get there. Tonight, we will spend some time discussing local markets, what sells, where to sell it, how to go from craft shows to art shows, etc. If you are interested in turning for a profit please join us tonight; if you have no interest in selling your work and don't have to account for the time you spend on a piece then tonight will be a boring night for you.

Thanks all

Terry Daniel

Re: Tonight's Topic...Different Strokes.....

#2

Brad Vietje

Re: Tonight's Topic...Different Strokes.....

Brad Vietje

>Great topic, Terry,

Since I have a day job that pays all the bills, I can take the time to spend 15 hours, if needed, to carefully hand-sand a wavy natural edge to perfection, but I could never charge enough to pay for all that time if woodturning paid the bills. There are very few who can command that sort of price. This could mean either a comprimise on the top end of the quality scale, or more often perhaps, this could dictate and limit what sort of work one does when turning for profit. I get the sense that many turners have found ways to make beautiful objects that can be done in a reasonable amount of time, either by perfecting technique and/or tooling, or by taking smart short cuts.

I recently saw a beautiful bowl by Al Stirt which was very smooth inside, but a series of coves around the outside of the bowl. These coves were very well done, and Al probably only kissed them with a little 320 to remove any fuzzies -- effectively cutting his sanding time in half by only sanding the inside of the bowl -- very smart. He could only get away with this by mastering the technique of making near-perfect shallow coves, though.

Another trick is to either make hollow forms with such a small opening that you don't have to sand the inside, or by using a collar that effectively stops probing fingers looking to feel how smooth the interior is. I generally sand everything my little fingers can touch, so if I used applied collars, I could sand a lot less. Some HF's are painted black inside so a look in through the opening or a void won't reveal ridges or any lack of sanding.

Have fun,

Brad Vietje

Newbury, VT

Re: Tonight's Topic...Different Strokes.....

#3

Stuck in the Middle....as a lot of others are too

Jennifer@Indy.USA

>I'm in the middle TD. I do have interest in selling my work, but I don't really have to account for the time spent on a piece when pricing my work, because I have a full time job that pays my bills and overhead. So I guess that's a luxury that I enjoy which gives me more freedom to enjoy the creative stuff and not have to keep tabs on the hours and minutes I spend turning, sanding or burning and carving and all that stuff. I have a feeling there are probably more of us out there in this position than you might think. I bet there's more in this situation than just trying to make a living at it on it's own. I'd be hard pressed to make a living at this.

Just my 2 cents.

Jen

Re: Tonight's Topic...Different Strokes.....

#4

Re: Stuck in the Middle....as a lot of others are

john lucas

>I couldn't agree with Jennifer more. I went through a period where I tried to achieve a certain amount of money per hour. All it did was add stress. I've since decided I'm going to make what I want and take as long as necessary to make the product nice and then I'll try to sell it. I do make smaller items that are easy to sell and that are profitable but I think you have to enjoy what your doing and that sometimes mean that you will make things that aren't money makers in terms of X number of dollars per hour.

I did like your statement that most of us won't get to the point that our work has a recognizeable style so we can ask a lot more money. Reminds me of when we were all young and wanted to be the next rock group. We all tried, and even tried to find our own style, but in reality none of us made it.

Should be a good topic tonight. I have a club meeting and will probably be late getting here. Hopefully I'll make it.

Re: Tonight's Topic...Different Strokes.....

#5

Re: Tonight's Topic...Different Strokes.....

Jim Shaver Oakville, Ont.

>Hi TD,

I think I'm burnt out on this topic....I'll see you another night.

take care,

Jim

Re: Tonight's Topic...Different Strokes.....

#6

Re: Tonight's Topic...Different Strokes.....

Carole Valentine

>I agree, Jim. It's getting a little old. I enjoy turning. I sell my turnings when the opportunity arises. Could I ever make a living solely from turning? Certainly not, at least not and still maintain the lifestyle I choose which is by no means extravagant, though I tend to like my creature comforts. :) I can't off-hand think of one person in WC who makes their living only from their turnings - no teaching, no pension, no ss, no spouse who has any income, no outside income whatsoever. There may be some but they are by far a huge minority. As far as accounting for my time on any given piece? No way. I am not going to put my name on a piece and call it "finished" just because some magic formula dictates that the allowable time is up. I do not abide by time/benefit ratios when turning and never will. We need to start talking about turning again.

Re: Tonight's Topic...Different Strokes.....

#7

Re: Agreed.

Pete Kekel - Kentucky

>By the numbers, my turnings are going to be very expensive for a little while longer because the Tigers are playing in the World Series and it is taking me a lot longer to finish anything these days. I'll be safe for the football playoffs, but if the Red Wings can pull it together my prices will jump again next May . . .

Thankfully, turning and still enjoying my limited shop time. Don't want to take any of this too seriously and ruin a great hobby.

Re: Tonight's Topic...Different Strokes.....

#8

Ditto!

Ron in Drums PA

>

Re: Tonight's Topic...Different Strokes.....

#9

Re: Tonight's Topic...Different Strokes.....

Hooligan

>And on the other side of the coin, is that I no longer have to rely on it as my income. Besides that, when I did, it was primarily spindles/custom stair parts.....anyhow.

Now, I don't really care if I sell anything or not. It is more for me again, and I like it.

Re: Tonight's Topic...Different Strokes.....

#10

Re: Tonight's Topic...Different Strokes.....

Tony Reynolds somewhere near Newark, Ohio

>Finally got chat figured out on this end. I'm looking forward to this topic. See ya all tonight.

Tony

Re: Tonight's Topic...Different Strokes.....

#11

Me Too

Barbara Gill, Remlik VA

>Turning what sells is trial and error and is very specific to where one lives. If your work sells too quickly, prices need to go up; if it doesn't sell, prices need to go down.

I agree with Jennifer,Jim and all of the others who are tired of this subject. Most of us just want to enjoy turning. If we make a little money while doing it great.

I may just read a good book tonight.

Re: Tonight's Topic...Different Strokes.....

#12

Barb Siddiqui

tonight's topic

Barb Siddiqui

>sounds interesting. Maybe I've missed other coverage of this, but that is your point, I believe, to get a discussion going for those considering selling their work? I'm always interested in the vagaries of local markets and hearing what sells well and what doesn't. I've heard that 'weed pots' used to sell like hotcakes but aren't moving anymore. Saturated markets are something anyone could benefit from hearing about. Thanks, Terry, I'll try my best to be there, to listen in if nothing else.

Re: Tonight's Topic...Different Strokes.....

#13

Suggestions: ?

T Daniel

>I have asked for suggestions for topics but few came. We can cancel the topics or we can go with the ones I have requests for. I am very busy now and really don't have time for all the whiners anymore. Every topic cannot be tailor made to fit everyone. If you have no interest in this one then please read a book while those who are interested come and get the info they want. If there is something you think would be a good subject for a topic then please email me and we'll try to get to it. If someone else wants to host this site they should email Ellis....as far as I am conerned the position is open.

TD

Re: Tonight's Topic...Different Strokes.....

#14

Re: Suggestions: ? A little OT

Tony Reynolds somewhere near Newark, Ohio

>Hi TD,

I not sure what's going on here as I've been away for sometime now. Tonights topic and last weeks topic are near and dear to me. Last week I still hadn't figured out the chat problems on my new laptop so I coudn't attend.

now the OT

To those who don't know my wife had a stroke last November so this year has been a struggle learning a new way of life for her and I both. It has meant me taking over many of the responsibilities of running the house and taking care of her. I've also had to look at new ways of work or making a living to be able to be closer to home. Being I had the shop, equipment, etc all ready in place chose to pursue turning and furniture building as that way to make a living. Marketing is a very important part of that equation. I'm here to learn as much as I can and as fast as I can about the topic. I'll probably be suggesting other topics for future chats. I've been turning like mad for the last several months to produce product and need to find all the ways possible to move it. So count me in with bells on.

I don't realy care for, or have time for the personality conflicts, life's to short. I'm just here to learn.

Tony

Re: Tonight's Topic...Different Strokes.....

#15

Weed pots, etc. Barbara

Ruth Niles

>I don't think you can say "the market" because it's more wher and what you might be selling. I have 3 galleries/shops I sell through and one can sell bottle stoppers, for example, really well, like 5 or 6 a week, one sells 3 a month and I don't even send any to the 3rd. They still have the original 6 I sent 3 years ago! And one of them will sell as many weed pots as I care to turn. So much for "the market". It's the same thing as "the economy", that's strictly where you live and what you do for a living.

Re: Tonight's Topic...Different Strokes.....

#16

Thanks Tony

T Daniel

>I get a lot of emails asking how to get started turning for a profit. I like to devote a portion of our chat nights to those who are getting started or trying to find ways to sell their products. Unfortunately, when I try to give advice to what sells and what does not many who are making what does not sell well in my area get upset. I really have not meant for my posts to sound like I do not respect the work done by others but for those who want to maximize their earnings there are things you can do and things you can't. In some areas of the country you hae to be conservative (like here) but in other areas you have to go to the other extreme. We'll discuss this tonight.

Thanks again

TD

Re: Tonight's Topic...Different Strokes.....

#17

Barb Siddiqui

tonight's topic

Barb Siddiqui

>Well that's encouraging, Ruth. All the more reason to search out a 'niche' market for one's area. I hope you'll make the chat tonight!

Re: Tonight's Topic...Different Strokes.....

#18

Producing and moving

Ruth Niles

>Tony,

If you need to produce and move as much as possible, you really should learn spindle turning. While hollow forms and bowls are beautiful and will sell eventually, spindle turning pays instantly.

A lot of turners who do artful work are also spindle turners to pay the bills. David Nittman for example, it takes him months to make one of his basketweave pieces so he does spindle turning in between to keep money flowing. Richard Raffan still, to this day, goes home and turns a pile of scoops, boxes and small bowls, puts them in his jeep and sells off his tailgate at local craft markets (I guess like our flea markets).

I supported myself and 4 kids (alone)for 10 yrs. and am still self-supporting with lathe work. No, I don't make a lot of money but I pay the bills and have $10 in my back pocket. I got to know contractors, they need a spindle to repair an inside stairway, porch spindles or corner trim for a fancy fireplace (that's a fun job!). Antique dealers need someone to turn spindles for 100-yr. old chairs, finials for rope beds, etc. That's the work that pays instantly, they order it, you do it, they pay you. Then you turn a few really great bowls or hollow forms and find a gallery or artisan shop, or do seasonal shows.

I couldn't say all this on the chat because I can't type that fast and by the time I say something, the screen is full of other comments.

Re: Tonight's Topic...Different Strokes.....

#19

Great and accurate answer Ruth

T Daniel

>

Re: Tonight's Topic...Different Strokes.....

#20

Re: Producing and moving

Tony Reynolds somewhere near Newark, Ohio

>Hi Ruth,

Thanks for the input. I know lots of contractors and have done some stair spindles. I'll look into pursuing that more. Just the kind of info I'm looking for.

Tony

Re: Tonight's Topic...Different Strokes.....

#21

Re: Producing and moving

Bob Fawcett

>Hi Tony,

I am a new turner and sell nothing.

I am currently building a 4 poster bed for my wife. I bought the wood at sealed bid auction from my company, so got a deal on it.

I would think something like this could find a market. the economics may not be there. You would certainly be in a better position to evaluate this. Just a thought.

Re: Tonight's Topic...Different Strokes.....

#22

Re: Producing and moving

Tony Reynolds somewhere near Newark, Ohio

>Hi Bob,

You're right. I have built several beds and or headboards for people. It's a matter of finding the right client willing to pay for something custom. Sometimes easier said than done.

Tony