Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Batty Gouge Grind Question

Posts

Batty Gouge Grind Question

#1

Batty Gouge Grind Question

David Propst, Valdese, NC

>I just got home from day one of a two day, ten person class with Stuart Batty. It was a great day, if I can only remember everything I learned. To start the day I cut beads and coves without catches which for me was probably a first!

In the afternoon we moved to the bowl gouge and I finally get the difference between the push and pull cut techniques with a bowl gouge and why his 40 degree grind makes the difference. I was getting a finish on crappy wet poplar that was very, very nice. Much more will be learned tomorrow I am sure.

My one concern with what I learned today is that Stuart says the all-around 40 degree grind has to be ground by hand, no jig can replicate it. I lost more metal off my prized Glaser 3/8 bowl gouge today trying to get a good grind on it than I have taken off it in a year on the Tormek. (A cheaper gouge will be used tomorrow.)

My question is have any of you who are familiar with this grind had any success duplicating it with a jig (i.e. Wolverine or Tormek).

Thanks!

David

(40+ signed up for the Exchange today! Remember to sign up you gotta send me an e-mail with name and mailing address!)

Re: Batty Gouge Grind Question

#2

Re: Batty Gouge Grind Question

Ed Karch

>Just count the lost metal as gloat tax.

Re: Batty Gouge Grind Question

#3

haven't tried a jig

john lucas

>It doesn't take long to learn to grind this by hand and once you get it down it only takes about 10 seconds to sharpen. I did have trouble at first because you have to be really light on the ground at the points I'll call 10 oclock and 2 oclock. Maybe 10:30 and 1:30 looking from the top. If you grind with the same pressure from one side of the gouge to the other you'll get a pointy looking tip with concave areas at about 10 and 2. Just look at the tip carefully as you grind and lighten up where necessary, slow down where there's too much metal.

Re: Batty Gouge Grind Question

#4

Mike Mahoney breaks it down in latest FWW

Craig Daymon

>Mike Mahoney, a good friend of Stuart's, details grinding the 40 degree bevel in the latest Fine Woodworking. Pretty clear instructions, but I haven't tried it yet. There are some nice pointers intended to make it easier.

-Craig

Re: Batty Gouge Grind Question

#5

Re: Batty Gouge Grind Question

Gary in Zirconia, NC

>I just finished his class yesterday. I tried hand sharpening his method after having seen his demo a year and a half ago. I did it for a month and was getting pretty good at it but not good enough for me so I went back to the jig. I found the closest I came to his grind was by adjusting the oneway varigrind all the way up and with the tip adjusted at 40 deg. to the wheel. But since I do a lot of bowls I like a steeper angle so I am currently using 43 deg. Stuart looked at my grind and said it was a good one and allowed me to use my jig for the two day course.

Re: Batty Gouge Grind Question

#6

Re: Batty Gouge Grind Question

Bill Howatt

>Is that "all the way up" to the end of the slot nearest the tool's handle when it's in the varigrind?

Thanks,

Bill

Re: Batty Gouge Grind Question

#7

Hi Gary

David Propst, Valdese, NC

>Hi Gary,

You missed out, the second group get to do a "super clean-up" after class ends tomorrow. You have told me exactly what I was wondering. I left my tools there or I would try it tonight.

How did you like the class?

David

Re: Batty Gouge Grind Question

#8

Re: Don't know, there, Lucky Dawg. :o)

Allen Neighbors

>But I hope you will make it to the Pensacola Gathering, so you can teach me how it's done. :o)

Re: Batty Gouge Grind Question

#9

Re: Mike Mahoney breaks it down in latest FWW

Ralph

>I tried it on my 1/4 inch gouge, it was easy to do and I thought easy to use. Not a very aggressive cut, but easy to control

Re: Batty Gouge Grind Question

#10

Re: Batty Gouge Grind Question

Gary in Zirconia, NC

>Yes, closest to the handle. That controls the angle of the bevel on the wings. It still isn't 40 deg. like Stuart likes but is close.

Re: Batty Gouge Grind Question

#11

Re: Hi Gary

Gary in Zirconia, NC

>I liked the class a lot. After seeing him do a demo I new he'd be a great teacher and he definately lived up to it! He will accept anything from 35 to 45 deg. I think he has gotten a little more flexible than he was a couple years ago.

Re: Batty Gouge Grind Question

#12

Re: Mike Mahoney breaks it down in latest FWW

Bob Elliott

>I talked with Mike last night and he said the article was edited severely compared to what he submitted. Originally there were twice as many pictures which told a better story. He felt that only a more experienced turner would benefit from the edited FWW version.