Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Rikon Mini - Good first lathe?

Posts

Rikon Mini - Good first lathe?

#1

Rikon Mini - Good first lathe?

Wendell @ Murphy, TX

>I am interested in purchasing a lathe mainly to make tool handles and knobs for furniture projects. It hasn't been a top priority for me but the $220 sale price that Woodcraft has on the Rikon mini lathe caught my eye. With the price difference between the Rikon (on sale) and the Jet, I figured it would help offset the cost of a basic set of turning tools.

What basic set of tools would I need to start turning handles which I am guessing are basic spindles? Any opinions on the set of 8 Pinnacle tools that is on sale for $160 at Woodcraft also?

Wendell ( looking over the edge of yet another money pit :-) )

Re: Rikon Mini - Good first lathe?

#2

Re: Rikon Mini - Good first lathe?

john lucas

>The Rikon is a good lathe as well as the jet. Way better than what I started with and my main reason for getting a lathe was to make knobs and tool handles.

I'm not a fan of sets of tools unless the price is really good. To turn knobs and tool handles you really only need a 3/8" or 1/2" spindle gouge. With a 1/2" spindle gouge you can rough out the wood and turn beads and coves. It might be tricky to turn a small knob. for that a 3/8" would be better.

Then I would buy a 3/4 to 1" spindle roughing gouge, and a 3/16" parting tool. With those 3 tools you can turn almost anything short of a deep sided bowl or hollow form.

Re: Rikon Mini - Good first lathe?

#3

Re: Rikon Mini - Good first lathe?

Phil Joines Krum, Tx

>Why not drop by either the Dallas Area Woodturners that meet in Garland or the Golden Triangle Woodturners who meet in Denton?

http://www.dallaswoodturners.com/

http://www.goldentrianglewoodturners.org/

I'm not sure if the Dallas club still has hands on workshops but the GTWT has one at my shop on the Saturday after the first Monday.

Re: Rikon Mini - Good first lathe?

#4

congratulations

john lucas

>TD Like you I'm always glad when a woodturner gets the prize. Or for that matter wood period. Turning has really come up in the art world in the last 20 years and it's nice to see the recognition.

Re: Rikon Mini - Good first lathe?

#5

Re: Rikon Mini - Good first lathe? M-Power?

John Kyler

>Although I dont own a mini anymore.

I work on the Jet all the time. It is a good lathe. The Rikon I think is made by Woodfast. My big lathe is Woodfast. So it should be good also.

But for a first lathe the M-Power that they started selling at Rockler looks like a very good machine. $160 although not variable speed yet, it has the step pully to change speeds.

Re: Rikon Mini - Good first lathe?

#6

I have one and love it..... but....

Devon Palmer

>There are some upgrades I've made to improve on components that are low quality....

1.) New tailstock ram and screw - ordered a set from Jet as the theads on the screw and within the ram were shallow, stripped it out in no time.

2.) New headstock bearings, the old ones ran warm and had a little chatter on some 11 inch platters...

3.) Drill and tap a second set screw in both the motor and spindle pulleys. 1 set screw allows the pully to rock back and forth - eventually working itself loose and getting noisey. (same with the Jet and General Mini)

The extra inch of swing allows you to realistically turn a 10 inch bowl - a size thats useable, where as turning someing 6-7 inch on a jet mini is just a bit small for practical use. The extra 25lbs and finned motor are nice changes too - plus, you can turn something 16 inches long - which you can't do on a Jet. (I can make Harry Potter wands on the Rikon, the Jet Mini is just too short for those)

...and for the price, you can't go wrong.

- Devon, Columbus, Ohio

Re: Rikon Mini - Good first lathe?

#7

Re: Rikon Mini - Good first lathe?

Russ Fairfield

>For what its worth, and this is an environment that is quite different from the home work shop.

I have been using 6 mini-lathes for teaching woodturning classes for the last year. 3 of them are Ricon, and 3 of them are Jet. The 3 Ricon are falling apart, and the Jet are not.