Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Yew bowl update, and a couple questions

Posts

Yew bowl update, and a couple questions

#1

Ellis Walentine

Yew bowl update, and a couple questions

Ellis Walentine

>Well, my original plan for the "cachunk" log went out the window today. There wasn't enough solid wood around the base of the stump to yield a continuous ring of wood, unless I wanted a rim that was a couple inches thick. So....

I Kept roughing until I got past a majority of the individual ridgelets or whatever you call those little buttresses on the sides of the main stem. I kinda like the way it's beginning to look. I opted for a flower shape instead of a trumpet shape, partly because of preference and partly because the surface of the blank seemed to want to go that way. How do you explain that kind of feedback/interaction with a workpiece?

Anyhow, here are a couple progress shots. I'm awed by the incredible grain across the bottom of the stump, to the extent that I had to step back and decide whether to turn two smaller bowls in bowl orientation instead of this monster in spindle orientation. The real beauty of this grain is going to be lost if I just hollow it out. An option would be to make it into a hollow form and get a lot of the endgrain figure back. Another possibility would be to core a blank out of the middle and then proceed with plan A.

The bowl at this point is 14" tall, 10" average diameter and 12 1/2" dia at the top.

Thanks for any suggestions.....

Ellis



Re: Yew bowl update, and a couple questions

#2

Re: Yew bowl update, and a couple questions

gil jones

>It sure is wonderful looking wood!! I reckon you could hollow it out and loose all that cool wood. Or maybe part off around half, and make a calabash form from the base (after coring it out for another bowl or box). The top part could get a waste block (as could the bottom), and be another calabash or a hollow form.

Gil

Re: Yew bowl update, and a couple questions

#3

Re: Yew bowl update, and a couple questions

Bill Stehman

>Ellis,

Fantastic wood and no matter what shape you end up with it will be a winner. WOW

Re: Yew bowl update, and a couple questions

#4

suggestion

Bill Stehman

>Ellis, cut it into two pieces, send me one.................................


img

Re: Yew bowl update, and a couple questions

#5

Re: Yew bowl update, and a couple questions

Carole Valentine

>Wow, Ellis! I think I would be forced to halve it and make an open bowl out of the flared part to show off that grain and a hollow form from the other part. Going to be beautiful no matter what you do!

Re: Yew bowl update, and a couple questions

#6

Re: Yew bowl update, and a couple questions

Garrett in Victoria BC

>Hi Ellis

Wonderful piece of wood. My vote is for a lidded, flared, tulip shape to show it off at its best.

Cheers, Garrett

Re: Yew bowl update, and a couple questions

#7

Steven Antonucci

1" hole in the top, and hollow it out

steve antonucci

>A challenge to celebrate the wood, turned down around 1/4".

I'd cry if I broke it, but that's what I'd do...

Steve

Re: Yew bowl update, and a couple questions

#8

Re: Yew bowl update, and a couple questions

RevDoug

>Ellis, I knew you had a beautiful piece of wood but not this beautiful. WOW! What ever you do with it I'm sure it will be gorgeous. I'm not real big of making a piece into 2. Seems like I try to same all the wood possible and neither works as well as what I intended in the beginning. My first thought was to lower the top inside the walls and hollow it out. Looks like this piece would be a prime candidate for the Russ/TD dye process as well. What ever you decide, I look forward to seeing what you come up with.

Turn 'em round,

Re: Yew bowl update, and a couple questions

#9

Re: Yew bowl update, and a couple questions

Juergen

>I'm with Garrett!! Make a lidded piece and keep that wonderful end grain in plain view.

Re: Yew bowl update, and a couple questions

#10

Re: Yew bowl update, and a couple questions *LINK*

Darrell Feltmate

>What about leaving the outer shape as is, possibly bringing in the base curve but I ma not sure if that is necessary. On the top, cut in along the rim leaving about 3/16" thick. Curve the top with the high point in center to accentuate the look of the grain and then hollow the piece? This is a beautiful piece of wood and the overall shape looks good at the moment.


Around the Woods