Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Single piece Christmas ornament contest

Posts

Single piece Christmas ornament contest

#1

Single piece Christmas ornament contest

john lucas

>I've been looking through all my books and magazines and there aren't many photos of single piece spindle turned christmas ornaments. I was wondering if anyone has any to share. These would be ornaments that could be made as a spindle turning without hollowing.

I thought it might be fun to run a short contest to see who could come up with the most unique one. I will make a set of ornament hollowing tools and offer those as the prize. It will take me a week or so to make them because I'm a little strapped for time right now so lets run the contest to midnight on the 31st of October. Halloween night.

The rules are simple. Start with one spindle sized piece of wood. It could have glue ups, segments, laminated etc but must resemble a spindle when you start. The turning must be done between centers although you could use multiple centers. Feel free to add surface design such as painting, carving and pyrography to the surface. send me the photo or get the piece to me before the 31st and I'll photograph it.

Re: Single piece Christmas ornament contest

#2

wrong e-mail

John Lucas

>Please send the photos for the contest to jlucas@tntech.edu I have something wrong with my home computer and can't get photos out of my e-mail.

Re: Single piece Christmas ornament contest

#3

Wow John....

Tony Reynolds somewhere near Newark, Ohio

>Makes real nice hollowing tools!! I have a set and they work very well. I don't have time to enter the contest but good luck to all who do.

Tony

Re: Single piece Christmas ornament contest

#4

Re: Single piece Christmas ornament contest

Ron in Drums PA

>Would you like me to setup a website for this John like I do for the critiques?

Just let me know!

Re: Single piece Christmas ornament contest

#5

Barb Siddiqui

Why before Halloween?

Barb Siddiqui

>Why not before Thanksgiving?? This sounds really fun, but there's no way in a week I could get to this.

Re: Single piece Christmas ornament contest

#6

That would be great Ron. Thanks

John Lucas

>

Re: Single piece Christmas ornament contest

#7

I agree, Thanksgiving it is.

John Lucas

>I thought this up early this morning and my brain doesn't work until about 8 am. This is a talented group so we should give everyone enough time to be really creative. If that's the case I'll add a 1/4" skew to the pot so you get 3 tools, a 1/4" skew, a straight hollowing tool and a curved hollowing tool. So lets say Sunday the 26th

Re: Single piece Christmas ornament contest

#8

Re: Single piece Christmas ornament contest

Mike Brazeau

>Judy Ditmer had an article in the Dec. '05 issue (#152) of Popular Woodworking that included both hollowed globe and single piece spindle ornaments. As I type I just found another article she did in PWW Dec.04 (#145) where the spindle ornaments are decorated with acrylic paints. I'll scan and post in a separate posting.

Mike


img

Re: Single piece Christmas ornament contest

#9

Judy Ditmer PWW Dec. '04

Mike Brazeau

>As an aside, this issue also has an excellent article by Dale Nish on Bird Houses.


img

Re: Single piece Christmas ornament contest

#10

thanks for the photos.

John Lucas

>

Re: Single piece Christmas ornament contest

#11

Re: Single piece Christmas ornament contest

Molly Winton

>What a fun contest. Now I'll have to put my thinking cap on......hmmmmmm. You're very generous John, thanks for a fun activity.

Re: Single piece Christmas ornament contest

#12

Re: Single piece Christmas ornament contest

Brian Simmons, Heflin, AL

>This year is the first time I have attempted ornaments. The local turning club takes donated ornaments from its members and enters a tree in an auction that benefits the childrens hospital. I joined in the spring and when the call for ornaments went out, I decided I would give it a try. Below is the result. The cylinder ornament is 4-1/4" tall and 1-3/4" in dia, the bell is 1-1/2" x 5/8". woods are black walnut and maple. Cylinder and puffy ornaments utilize maple veneer. The maple top shaped ornament was hollowed.


img

Re: Single piece Christmas ornament contest

#13

Barb Siddiqui

Giving...Thanks....John!

Barb Siddiqui

>

Re: Single piece Christmas ornament contest

#14

Re: Single piece Christmas ornament contest

john lucas

>Very fun Brian. I always thought about trying an ornament like your "squashed" ones but have never taken the time to figure it out. Good job on those.