Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

White Ash Burl Bowl

Posts

White Ash Burl Bowl

#1

White Ash Burl Bowl

Dominic Greco in Richboro PA

>Hello Everyone,

Here's another bowl I completed just last week.

It's from a White Ash Burl that I found at a local sawmill. I was helping my friend pick up some poplar for a project he was doing and just happened to ask the sawmill owner if he had any burls laying around. He brought me over to this big ole stump and said, "Here ya go." When I asked how much he said, "Ten bucks oughta' cover it." With a little help from my friend and a borrowed wheel barrow, we moved that burl stump into the back of my truck.

I finally sawed some up and left a chunk in my shop. When I came back into the shop the next day, there was sawdust all around the burl. It was infested with powder post beetles! Needless to say, I got that burl out of the shop and sprayed (soaked actually) it with Timbor. Later I bandsawed it into a round and rough turned it to shape. The roughed bowl was then soaked overnight in DNA. (I'd like to see the critters that survived Timbor AND Alcohol soaking!) :>)

When it came time to final turn it, there was no sign of PPB infestation. There were however holes all through the blank. I decided to fill the smaller ones with Turquoise powder and the larger ones with ground coffee.

I have to say, I was very impressed with this burl. The figure and color were unexpected and totally amazing! It was also ranked as some of the toughest wood I've turned. Not as bad as dried Osage Orange. But definitely tougher than maple burl. I had to resort to wearing my "fingerless" gloves to protect my hands.

I wanted the rim to have the look of a finished bowl, but feature the unexpected breaks of a natural edge bowl. The base gives the bowl a very small "lift" above the surface of the table and features a series of small concentric rings.





Specs:



  • Outer dia.: 8 1/2"


  • Height: 4 1/2"


  • Wall thickness: 1/4"


  • Base dia.: 2 3/4"


  • Sanding Method: Dry sanded to 600 grit, burnished with craft paper


  • Finish: (1) coat of Bull's Eye Sealer, (3) coats of Watco's Danish Oil interspaced with buff by 0000 steel wool


  • Final: Buffed with White Diamond followed by a coat of Rennisance Wax







I'd appreciate any comments you'd like to make on the shape and proportions.

Thanks for viewing

See ya around,

My ugly mug

Dominic


img

Re: White Ash Burl Bowl

#2

Re: The bowl looks nice Dom, but the ....

Jamie Donaldson

>... photo needs some help in order to convey the accurate color of the wood. It appears you used tungsten lights with the color balance on the camera set to daylight, resulting in the orange color cast. Match the color(Kelvin color temperature)of the lighting to the correct camera color balance and the color will be a much better representation of the work- might be time to read the camera instructions again!

Re: White Ash Burl Bowl

#3

I knew someone would say something

Dominic Greco in Richboro PA

>You're right, the camera settings were on tungsten lights. I have a digital camera with some presets for lighting. I selected what I thought would be adequate compensation.

To be honest, I'm not really happy with the photos I've been getting. But it if I had waited to get them perfect (or as close to perfect as a ameture like myself could hope), I'd never have posted them.

It would really help if I could set up my photo booth again. I had to take it down to make room for the baby furniture. As it is, I barely have time to turn a bowl much less set up my photo booth.

Re: White Ash Burl Bowl

#4

Steven Antonucci

Another beauty

steve antonucci

>Not sure about the Turquoise, though. IMO, you need more of it to be "effective". Great form, but probably not a user, huh? I see salad dressing going through those bug holes... :-)

steve

Re: White Ash Burl Bowl

#5

Leo Van Der Loo

Love that curve, Dom, looking good.

Leo Van Der Loo

>

Re: White Ash Burl Bowl

#6

Re: White Ash Burl Bowl

Allen Neighbors

>Spectacular wood. Ya did it well, Dom.

Re: White Ash Burl Bowl

#7

Re: White Ash Burl Bowl

George Van

>Hi Dom, I sure do like where you stopped turning with this one in order to keep it together. I like the way you stopped the rim where you did rather than cleaning up the inclusions. I have a roughed bowl blank that has been in the shop for over a year and after seeing this one I think I know what to do with it. Great curve and the foot looks like just enough. Thanks for posting.

Re: White Ash Burl Bowl

#8

Re: White Ash Burl Bowl

Mike Cunningham (Cape May NJ)

>Great curve Dom!