Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Having fun

Posts

Having fun

#1

Having fun

Tony Reynolds somewhere near Newark, Ohio

>Working on getting a bunch of cherry bowls roughed out. Here's a photo of a 14" salad bowl in the works. The other photo is todays shavings from other bowls roughed today. I just need to get my aim better and I wouldn't need to shovel all the time.

Tony




img

Re: Having fun

#2

Re: Having fun

Ron in Drums PA

>I nlove the smell of fresh cut cherry

Re: Having fun

#3

Re: Having fun

Mike Cunningham (Cape May NJ)

>Looks good, keep having fun!

My eyes have gone, to you know where in handbasket, what is that mounted on the wall to the left (our view) of the breaker box?

Mike

Re: Having fun

#4

Re: Having fun

Don in Central Illinis

>Looks like an old telephone gang connection. I have a couple of those in the basement of the photo studio.

Re: Having fun

#5

Re: Having fun

Tony Reynolds somewhere near Newark, Ohio

>Hey Mike,

I know all to well about the eyesite problems. I've got reading glasses staged everywhere. The thing on the wall you ask about is a punch down block. It's for the phone and network coming into the barn, er I mean studio.

Tony

Re: Having fun

#6

Re: It surely looks like it!

Allen Neighbors

>That's what turning's all about. I think. :o)

You're too neat. I thought artist's are supposed to be slobs. :o)

Keep having fun!

Re: Having fun

#7

Re: It surely looks like it!

Tony Reynolds somewhere near Newark, Ohio

>I fit that description very well. All I needed to do was turn the camera around. My wife would even agree with that.

Tony

Re: Having fun

#8

Leo Van Der Loo

You're aim is just fine, move the can, LOL

Leo Van Der Loo

>Have fun and take care

Leo Van Der Loo

Re: Having fun

#9

Re: Having fun

Jennifer@Indy.USA

>Looks like you had a great day Tony!

:)

Re: Having fun

#10

Question ?

Ruth Niles

>Tony, your building looks like the same construction as my 3-car garage. It doesn't look like you have it insulated, do you have heat in the shop? If so what kind?

Re: Having fun

#11

Re: Question ?

Tony Reynolds somewhere near Newark, Ohio

>Hi Ruth,

I have a HotBlast wood furnace made by US Stove Co. It's made to heat 3000 sq ft. My shop is 2500 sq ft with no insulation, yet. If it doesn't get below 25 the stove will get it up to about 55 to 60 degrees or so which is fine for me but others think it's cold. I realy need to insulate but it's not in the budget yet.

Tony

Re: Having fun

#12

Dick Hines

Re: Having fun

Dick Hines

>Tony, when you figure out how to get the shavings to go where you want the to go will you let me know. All of mine just go where they want to.

What have you hooked up to the 66M150 block.

Re: Having fun

#13

Re: Having fun

Tony Reynolds somewhere near Newark, Ohio

>Hi Dick,

Will do on the shavings. Not familiar with that number but if your talking the punch down, it's the phone/DSL coming into the shop and out to the house and the network coming back to the shop from the house. Not really using the network wiring now with wireless, but when I built the place I wired it to the max. 3-rg6 3-rg59 3-cat5 runs to the house plus 100amp service. My shop office is even wired for surround and a projector. Figured I might need a show room for the audio/home theater business one of these days.

Tony

Re: Having fun

#14

Dick Hines

Re: Having fun

Dick Hines

>66M150 and a punch down . It's all the same. I have been useing them for over 40 years. Old telephone man.

Re: Having fun

#15

Re: Having fun

Bob Fawcett

>Tony,

I made a plastic curtain similar to the roll up bamboo blinds you might find on a porch. I roll it down when turning and put a large cardboard box on the floor. Most of the shavings are stopped by the curtain and land in the box.