Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Jet slow sharpener

Posts

Jet slow sharpener

#1

Jet slow sharpener

WOODNUT358

>Has anyone purchased,or have any experience with the new Jet wet slow speed sharpener? I know some people have the Tormak and like it.The Jet seems like a good buy with all the extras.

Re: Jet slow sharpener

#2

Re: Jet slow sharpener

Bob Elliott

>Our club meets at a Woodcraft store, and the manager gave us a demo on the Jet unit. The extras that come with it, the variety of extras available and the fact that you can vary the speed (and I believe the torque) makes this unit (I think) better than the Tormek. If I were going to buy a slow speed wet stone machine I'd have to go Jet.

Re: Jet slow sharpener

#3

Re: Jet slow sharpener

Gary Ratajczak

>Saw it, and the Tormek at a wood show in Buffalo a few weeks ago. Have heard that a few of the first ones seem to have the motors burning up.

I am considering one or the other, and really liked the fact that the Jet was variable speed. Allows you to slow things down for even more for smaller tools. It is designed to make up for wearing of the stone that changes the diameter.

Jet is missing a few of the holders for turning tools. The Tormek patent has not yet expired, so Jet could not copy 100%.

I agree - the Jet seems like a good deal for the $299.00 that it's currently being offered at.

I think the stone on the Tormek is a better quality. I think the Tormek will remain the standard - I'm leaning toards getting one of them in the spring versus the Jet.

Re: Jet slow sharpener

#4

Re: Jet slow sharpener

John Kyler

>The one I looked at seemed like the gears/bearings/motor were not as tight/quiet as the Tormak. I think I would wait a bit to see how it shakes out. But today I would spend the extra and get the Tormak.

Re: Jet slow sharpener

#5

Re: Jet slow sharpener

Fog Tanner

>I have had a Tormek for about five years now and use it for all my turning tools except scrapers. I have also looked at the Jet and glad that bought the Tormek. After using the Tormek, I can see no use for the speed control, just one more thing to burn up. The surface speed is not enough to make a difference. In five years my wheel as worn from 10" to about 9.5", and I use it on gouges which is rough on the wheel from a wear standpoint. Which if the Jet wheel wers like the Tormek, you start out on the slow side and in 20 years you are at the high setting.

I made an adapter for my Tormek so I could sharpen my bowl gouge using my Ellsworth job. That way I can get most of the metal off on a dry grinder and sharpen it on my Tormek. I would not want to try that on the Jet that I looked at, was too bulky.

Had I to do it over again, I would buy the Tormek in a heart beat.

Re: Jet slow sharpener

#6

Tormek adapter

Jose Klipstein -Cleveland OH

>I would sure like to hear more about your Ellsworth jig adapter..... possibly see a picture? Thanks

Jose

Re: Jet slow sharpener

#7

Re: Tormek adapter

Fog Tanner

>No digital camera, but quite simple. I have a "sharpening station" similar to the one Norm made, has a drawer for all my jigs and other storage below that. I made a removable base for my Tormek to sit on which has an adjustable arm similar to to one I made for my dry grinder. It places the Ellsworth jig in the same relationship to the wheel as on my dry grinder, that way I can go from the dry grinder to my Tormek if needed. Most of the time I just use the Tormek and save the tool steel. The arm mechanism does get in the way of sharpening other tools, but I can remove the unit and put it back in a few seconds and the reason for the removable base.

The way the base is made it locks the Tormek down against two guide rails on the back and side so it is always in the same location. It also keeps the arm from being pushed down in the front in use, also locking the arm to the Tormek for stability. The Jet I looked at was just too bulky with the setup they had.

Re: Jet slow sharpener

#8

Re: Jet slow sharpener

Chris K in MD

>I bit on it the week that they lowered the price on them. It was a deal too good to be true. It didnt hurt that I had a Jet GC from the WC turning contest or a GC from woocraft too.

I have used it and it works well. I have not spent alot of time with a Tormek but one feature that was very apparent was the larger water resivoir. The accessories work for each other so you can buy either. I bought the tormek carving tool jog and returned it, I liked the results I got freehand better.