Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Do it in public.

Posts

Do it in public.

#1

Do it in public.

Phil Joines Krum, Tx

>Our club did a public demo at the first annual Roanoke, Texas festival yesterday. It's one day, noon till 8PM. I don't know what the attendance was, at a guess maybe 5000. We had 5 minis (all Jet), display table, a grinder and 8 turners in a 10x20 foot area. The idea was to do some tops, freedom pens and bowls for the empty bowls project.

No bowls and only a couple of pens were done. I had prepped about 190 spin top blanks to turn and give to kids 12 and under. They were 3"x 3/4" disks with 1/2" x 4" dowels. Mostly from Walnut off cuts from a furniture company. Once the dust had cleared we had about 10 left. 4 of the lathes were used all day to do them. From about 3 o'clock till 7:30 there where lines at all 4 of the lathes that sometimes had 20 kids each waiting. Some of them stood there for an hour. We could have used a couple more turners to provide breaks.

I'd say they were popular. Some of the kids had never seen one before. They make a good demo for the general public but be prepared to work your butt off, those kids don't cut you any slack :>).

Re: Do it in public.

#2

Re: Do it in public.

keith zimmerman, Normal IL

>Sounds like a great time was had by all, even though it was a long day. You and your club made a lot of kids happy. Maybe some of them were so taken by the activity that they will desire to try turning for themselves.

BTW, what is the empty bowls project?

keithz

Re: Do it in public.

#3

Painted faces.....

Barry Irby

>We did a charity event to raise money for a local hospital. My job was to paint faces. Talk about kids standing in line... I'm pretty sure some of them were at least two faced. I think some may have brought four or five faces with them. Next time, if I am forced into service, I will use either a spray gun or a roller, at least for the primer.

Sounds like a good event.

Re: Do it in public.

#4

How about dipping ?

Phil Joines Krum, Tx

>;>)

Re: Do it in public.

#5

Empty Bowls *LINK*

Phil Joines Krum, Tx

>It's a world wide project to raise money for food banks. Turners and potters make bowls that are given away for a donation to the local food bank. Around here there's a lunchen where people donate $20 to the local food bank. They get to pick a bowl and have soup. Some places have an auction for the better pieces. Our club's 50 members made 105 of them this year.


http://www.emptybowls.net/