Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Questions for John Lucas

Posts

Questions for John Lucas

#1

Questions for John Lucas

Barry Irby

>John, You mentioned cutting a rebate in the piece of wood for a mirror. Are your mirrors made of a single piece of wood? Does the mirror just slip in from the front or do you make a ring that covers the edges. Are the mirrors perfect enough to fit in without having to cover the edges? Where do you get nice round mirrors? I have made a couple and went to the trouble of making a ring.

Re: Questions for John Lucas

#2

Re: Questions for John Lucas

john lucas

>Barry I cut the rebate for the mirrors to be very slightly over 4" which is the size of the glass. I then use the toe of the spindle gouge to undercut the rim so that if the wood shrinks when I send it to my very low humidity gallery, it won't pinch on the mirror. I tried making big openings to compensate for wood movement but it just looked ugly.

I have turned a few with inserts to cover the mirror edges and they do look nice this way but it's a terrible waste of wood and time. I would have to do that on expensive mirrors.

Re: Questions for John Lucas

#3

Thanks

Barry Irby

>What if you started with stock that was about 5/4 and parted into tow pieces? Then you could glue it back together. If you kept the grain lined up the join would not show much. Maybe I am over thinking this. You obviously have found a way that works for you.

Do you make the handle separately and apply it or do you turn both together?

Re: Questions for John Lucas

#4

Re: Thanks

john lucas

>Barry I've done segmented mirrors, laminated mirrors, mirrors with Inlay, and just about everything you can imagine. I've even tried cutting them in half and gluing them back together with colored epoxy so a line runs through the back of the mirrot. This method would allow you to insert the mirror after gluing but you might have trouble holding it to turn the back side. Vacuum chuck would probably work. There's no end to the fun you can have with these. The only technique modern turners are doing that I haven't been successful with on mirrors is piercing. If you make a pierced back then you have to add a false inside so you don't see the back of the mirror glass. it also collects dust and looks terrible after 6 months.

Re: Questions for John Lucas

#5

Just as an aside.

Don Henthorn

>I made number of mirrors for which I turned rings on the face of the blanks maybe 3/4" wide and a 1/4" smaller on the inside than the mirror diameter. I then turned a depression in the face of the mirror block that the mirror would just fit into. I then glued the mirrors into the depression and then glued the ring back on the block lining up the grain appropriately. Didn't take very long and after the reglued ring was faired off and sanded one couldn't tell how the mirror was placed into the block. If anyone is interested I could show a pic.

Re: Questions for John Lucas

#6

Forgot a step or two (Sheeeesh)

Don Henthorn

>like parting off the ring before turning the depression for the mirror. I knew I shouldn't have tried that post.

Re: Questions for John Lucas

#7

Re: Forgot a step or two (Sheeeesh)

john lucas

>Don I tried a few in a similar fashion but if a Customer ever breaks the glass it's impossible to repair. I decided my method of undercutting offered the best of both worlds. The hole for the mirror is so close to the final size that it looks nice and you can still break out the old glass and put in new glass if necessary.

Re: Questions for John Lucas

#8

Re: Questions for John Lucas

john lucas

>Barry I never answered your question on the mirrors themselves. I buy bevel edged round mirrors from a place called Display collections. You need a tax number and have to buy $100 dollars worth but it gets the price down. I will sell the 4" mirrors for $2.50 + shipping. I don't know what shipping would be I've never done that.

Re: Questions for John Lucas

#9

Agree, John.

Don Henthorn

>However I have really turned a goodly number of these and have never heard of one breaking. These mirrors are tilting mirrors attached to a base which can be used on a table, vanity or whatever. Still small enough to be hand held for checking the back of the head in another mirror. I always wanted to put a regular mirror on one side and a magnifying mirror on the other but could never find a suitable maginfying mirror.

Re: Questions for John Lucas

#10

Probably should have mentioned

Don Henthorn

>that the mirrors are six inch round.