Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Sorby Hollwmaster

Posts

Sorby Hollwmaster

#1

Sorby Hollwmaster

Don in Central Illinis

>I just recently (this summer) got into making hollow forms, and love it. I also, just received my sales flyer from Woodcraft store listing a Sorby hollowmaster, in either full size or medium. Since, I am still fairly new, what is your take on this. I am thinking of the full size and it's on sale for $55.99. What are your thoughts on this. TIA.

Re: Sorby Hollwmaster

#2

Re:Don- there are much better tools....

JamieDonaldson

>...that can be home made or purchased before spending money on the HollowMaster. For a starter I recommend the Oland offset hollowing tool as more versatile even though the initial cost may be higher( I haven't checked lately) It is also very easy to make your own with minimal tools and metal working skills. Check out the Ellsworth style tools available for a model.

Re: Sorby Hollwmaster

#3

Re:Don- there are much better tools....

Don in Central Illinis

>I have thought of trying to make a hollow form tool but don't know if my metal skills equal my wood turning skills. Maybe I can try it before the sale goes off and maybe get lucky and make something as good as, or better. Thanks.

Re: Sorby Hollwmaster

#4

Re: Sorby Hollwmaster

Carole Valentine

>Don, I have the Hollowmaster, the Sorby Multitip, 3 sizes of Kelton hollowers and a few mico hollowing tools I have made myself. My choice for hollowing through small openings is the Keltons. There is a bit of a learning curve with any tool, but I think the curve for the Hollowmaster is bit steeper than most and I am not fond of the amount of overhang from the toolrest required by the Hollowmaster. For semi-enclosed forms and undercut bowls, I use the Multi-tip a lot.

Re: Sorby Hollwmaster

#5

Re: Sorby Hollwmaster

Hooligan

>I second what Carole said.

Dollar for Dollar, the best hollowing rig I've come up with is the Don Pencil system. I believe that you can get the stinger for $50, or so, and just get a handle. MUCH better tool for forms.

Re: Sorby Hollwmaster

#6

Oh yeah, I have that one too

Carole Valentine

>as well as the Stinger set. I use the Stinger sometimes when nothing else will reach what I want to cut, but almost all of my pieces are too small for the Scorpion. I Don't use the armbrace for two reasons (1) I should have gotten the short one but didn't know they were available at the time and (2) I feel like anything that traps my arm in it is an accident waiting to happen if I get a bad catch. Guess I am just paranoid. Some people love an armbrace.

Re: Sorby Hollwmaster

#7

Re:Don- there are much better tools....

Rick Bane

>what about the termite from oneway. i have it and i love it. that thing just cuts so nicely. iam also new to hollow forms but this seems to be one of the easiest ways to hollow.

Rick

Re: Sorby Hollwmaster

#8

Re: Oh yeah, I have that one too

Don in Central Illinois

>Thanks all, I'll keep looking. I'll google Don Pencil and check that out.

Re: Sorby Hollwmaster

#9

Re: Oh yeah, I have that one too

Hooligan

>I hear ya. Though, I've found that with the armbrace, I am MUCH less likely to catch. Just better control all around. I'm almost the exact opposite, now. I wouldn't be caught without it. Doesn't matter whether it is little turnings, or with monsters, the armbrace is there. I don't really rely on it, per se', though I do know it's there, and can leverage a bit more out of the cut before repositioning the tool.

Heck, I even use it with the stinger, it just makes sense, ya know?