Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Elbo Tool?

Posts

Elbo Tool?

#1

Elbo Tool?

Ruth Niles

>At the SWAT Symposium in TX last weekend, my booth was next to Stan with his Elbo tool hollowing system. I loved watching it demonstrated and a number of attendees tried and bought it. Does anyone here own it? If so, what size and shape turnings do you find it works the best? I'm thinking about it. I tried it and you can guide it with 2 fingers, not that you'd necessarily do that, but just a test as to ease of use. Stan was only demoing on small bowls, which were easier to see the cutting edge and easier to get turners to try it, I'm wondering about hollow forms.

Opinions?

Re: Elbo Tool?

#2

Re: Elbo Tool?

Stuart Johnson

>Well Ruth if you hadn't been so pleasant to talk with I might have seen it in action. So I guess since I didn't see it I don't have an opinon.

Re: Elbo Tool?

#3

Re: Elbo Tool?

David Galloway

>I bought one after the AAW convention. Several turners here at the Georgia Association of Woodturners bought one and everyone seems extremely happy with it. As you mention, it is a breeze to use in terms of hollowing. It mounts easily, and can be used in a variety of shapes. The only downside that was pointed out to me by Don Duden, master of invention, was that one of the couplings was not as stout as he would like. Several guys in the South Metro group made their own version, bumping up the hardware. I have had no problem with mine, and particularly appreciate the maker including several adaptors that make the tool usable with all kind of diameter boring bars. That is sweet! The Elbo Tool is now available at Highland Hardware...ask for Phil.

Re: Elbo Tool?

#4

Re: Elbo Tool?

C. Hoiness, Phx

>I bought an Elbo Tool at the Desert Woodturning Roundup 2006 in Mesa, Arizona and have been very happy with it. I sent for the arm bearings from Stan and now the tool is more effective. I also have a replacment 3/4" round bar cutter to get into smaller places. This tool is great for anyone who is just beginning. If you have any problems, call Stan. He is easy to work with.

Re: Elbo Tool?

#5

Re: Elbo Tool?

eliot d

>Ruth, I bought on at the symposium in Louisville. I prefer it to my other two -- the Don Derry and the Spin Doctor( but the Spin Doctor will allow turning a much bigger vessel.) It's the easiest to control with no hang ups; the others always bind up. There are several drawbacks though: one is that, by design, it attaches to the tail stock quill; so the size of the turning is limited by what you can fit between the tail stock quill and the turning, taking into account that you may be using a chuck that also takes up space. So I'd say, depending on the length of your lathe bed, size of chuck, etc., that you can turn a vessel that's about 7 to 9 in inches deep. If that's not deep enough, they sell some hardware that somehow attaches to the bed and effectively places the tail stock further away from the headstock. I think it costs something like $80, but please don't quote me. Also,you have to fool around with reducers,etc, if you want to use smallish tools to hollow through a small opening. But that's not a deal breaker. I can tell you that John Jordan recommends this rig, which probably says a lot because, to my knowledge, he hollows without a constraining rig.

Re: Elbo Tool?

#6

Re: Elbo Tool? *LINK*

Bart Rhoads

>Ruth, I also bought one of the Elbo Tools at the SWAT symposium. I have used it quite a bit in the last week just to see what it would do. I was very impressed. I have used it in making hollowforms as well as closed forms and bowls with inside lips. I think it is supperior to the handheld Stewart type systems but it won't take the place of captive system. For me the depth limits is around 7 to 8". It works great for shear scraping the inside of bowls or hollowforms by installing a round cutter on the end of the 1/2" bar and rotating it towards you to 45 deg. It can be very aggressive or you can take very lite cuts. Lots of control. I was very leary of it at first but after using it now, I would not hesitate to recommend it to anyone. If they had not had it set up back in the hands on area where you could try it out, I would have not bought it. I dont think you will be dissapointed with it. Just in case anyone is intrested, their web site is


http://www.Elbotool.com

Re: Elbo Tool?

#7

Re: Elbo Tool? Eliot............

Ruth Niles

>I overheard a conversation between Stan and a customer about possibly either an adapter or alternate rig set up that would attach to a post rather than the tailstock. As you noted, that does limit the depth of turnings it works well with even with the fact that there are 2 elbows for moving. Actually, the double jointed bar is what really attracted me for its versitility.

Stan did insert one of John Jordan's hollowing tools to demo with and, you're right, that did impress people.

Re: Elbo Tool?

#8

Re: Elbo Tool?

Ruth Niles

>Bart,

Looks like I just may have to buy one.

Thanks,