Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

American Chestnut

Posts

American Chestnut

#1

American Chestnut

ERWIN NISTLER

>I just repaired and old, old spinning wheel for a lady. She got it "back East". I suspect it is made of American Chestnut.

Can any of you tell me how to identify American Chestnut?

I can not cut off a piece of this ladies spinning wheel to test.

Re: American Chestnut

#2

Re: American Chestnut

Ruth Niles

>Hi, did you try a google image search? That's the first place I go to see pictures of whatever it is I have to identify.

Re: American Chestnut

#3

Re: American Chestnut

Jim King

>http://www.hearnehardwoods.com/Inventory/chestnut.html

Re: American Chestnut

#4

Re: American Chestnut

fred hatton

>I repair a lot of old spinning wheels and most if not all are

made from quarter sawn oak and hard maple. The grain on quarter

sawn oak and american chestnut are simular and on a peice covered

with the smoke, dust and oil of old age I dought that one could tell them apart.

Re: American Chestnut

#5

Brad Vietje

Re: American Chestnut

Brad Vietje

>... except that the Oak would be much heavier. They would look a lot alike.

Safe spinning,

Brad Vietje

Newbury, VT

Re: American Chestnut

#6

Re: American Chestnut

Warren in Lancaster, PA

>Chestnut is similar to oak in that it is ring porous. That is to say the annual rings are rows of pores. In addition to the rings, the various oaks also have prominent rays. The rays are visible on the end grain as lines perpendicular to the rows of pores and on the quartersawn surface as flecks of tissue that doesn't have visible pores. Chestnut does not have visible rays. In addition chestnut has larger pores making it a coarser wood and it is lighter and softer than oaks in general and white oak in particular.

Fred is right about spinning wheels; white oak and hard maple are the preferred materials. It would be hard to imagine making a wheel rim especially out of the much softer chestnut.

Re: American Chestnut

#7

Re: American Chestnut

fred hatton

>Well I had to go check out my three chestnut boards. Been saveing them for about twenty years now for that special project. Warren is correct, chestnut does not have visible rays. (When I posted I thought It did) In two peices of equial size chestnut is a lot lighter than most of the oaks. Maybe if the lathe would break I would get some of these good boards used up. Ha.

Re: American Chestnut

#8

Re: American Chestnut

ERWIN NISTLER

>Thanks you all for the information.

I now believe the spinning wheel is not made of American Chestnut but rather of Oak with a maple treddle.

The lady picked up the wheel the other day and that is what I told her.