Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

If you are tired of doing wine stoppers... *LINK*

Posts

If you are tired of doing wine stoppers... *LINK*

#1

If you are tired of doing wine stoppers... *LINK*

Mike Brazeau

>Came across mention of this in Macleans Magazine, our national equivalent of Time Magazine. This fellow makes fancy tampers for making espresso coffee packs before they are inserted in the espresso machine. I'm an unleaded guy now, but I'll never forget stopping in the afternoon while once on business in Italy, going out to a street coffee vendor and belting back that caffeine and sugar. What a lift! Ruth, maybe there is an opening to broaden your product line?

Mike


Coffee Tampers

Re: If you are tired of doing wine stoppers... *LINK*

#2

I wonder where

Dustmaker Mike

>you can get the bases? Anybody know? I have a few friends (really I do) that use these and I bet a custom madeone forChristmas would be just the ticket.

Re: If you are tired of doing wine stoppers... *LINK*

#3

Leo Van Der Loo

Re: I wonder where *LINK*

Leo Van Der Loo

>He Mike keep the dust down ;--))

Mike there must be a goldmine out there for making those bases, did you see the prices they want for those metal discs ?? the question you asked came up on the rec. wood turning site a while back, and I have a link to a site that sells both whole and parts.

Have fun and take care

Leo Van Der Loo


http://www.coffeetamper.com.au/products/vanilla.html

Re: If you are tired of doing wine stoppers... *LINK*

#4

Re: If you are tired of doing wine stoppers...

adrien

>Sorry it's so large, I couldn't seem to shrink it�but I made this feller for my espresso maker some months ago.


img

Re: If you are tired of doing wine stoppers... *LINK*

#5

$45 AUD

Dustmaker Mike

>Wow I guess that won't be a Christmas Present.

Re: If you are tired of doing wine stoppers... *LINK*

#6

From looking at

Dustmaker Mike

>the pictures from the above post it seems there is a difference in the taper on the base.

I guess I am wondering why it would make a difference? Also what about the weight? I like the looks of yours and the idea is easy enough. How do you like it and does it work correctly?

Thanks

Re: If you are tired of doing wine stoppers... *LINK*

#7

pipetampers...

Leppikallio

>...are much smaller giving more room for design... There seems to be some kind of market for these also and because they are much smaller less material is also needed... Just don't tell anyone that nail will do because it won't... hammer is tool, not nail. Tamper is tool, not nail... :)

Re: If you are tired of doing wine stoppers... *LINK*

#8

Re: If you are tired of doing wine stoppers...

Bill Kay

>I have been making these for years. I glueup a blank using hard maple for the tamper and then a segmented section for the handle. Seems to work fine and last for years.

Set the tamper section using end grain grain on the vertical. Sand it to around 400 and burnish.

When I make one for myself I make it very plain. Problem I had was everytime someone was over for a visit they "just had to have it" and away my tamper went.

Ugly seems to get left behind.

Regards,

Bill

Re: If you are tired of doing wine stoppers... *LINK*

#9

Scoop/Press

Ed in Leaside (Toronto, Ontario)

>Someone, many many years ago, gave me an espresso maker. The backside of the scoop fit the grounds holder and was the press. Eventually the machine died (it wasn't an expensive one) and I replaced it with a good used machine (Faema). Used didn't come with a press or scoop so I used the old scoop/press even though it was too small for the holder.

A couple of years late that scoop broke, it was plastic, and I came up with this as a quick & dirty replacement. I don't think it matters too much if the press is flat or convex, but it must fit the filter basket. Oh, and I should have been more careful sizing the scoop, it's too small even though the angle of the pic makes it look large.

Maybe I should ask the local beanery if they'd like to carry them. :)


img

Re: If you are tired of doing wine stoppers... *LINK*

#10

Why not turn your own?

Phil Joines Krum, Tx

>Check some metal recycling yards for copper, brass or aluminum. Drill and tap (finish tapping with a bottoming tap) a 5/16 hole in the blank. Use a bolt for a mandrel. The metals can be cut with normal turning tools. With the price of scrap brass now around $3.50/lb. the blank would cost around $1.

Re: If you are tired of doing wine stoppers... *LINK*

#11

Cool Idea

Dustmaker Mike

>I might just try that.

Thanks All

Re: If you are tired of doing wine stoppers... *LINK*

#12

Re: From looking at

adrien

>Mike, it works fine for me. From the looks of the whole post, I'm not the only one who's tried this. I just measured the size of the cup and made the tamper to fit. Any taper is purely coincidental.