Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

OWWWWWW!

Posts

OWWWWWW!

#1

OWWWWWW!

Bill White

>Would someone email me and remind me to keep my fingers off the chuck while I'm finish sanding a bowl?

Bill

Re: OWWWWWW!

#3

Re: OWWWWWW!

Dick Gerard bowlman

>Paint the chuck jaws bright red. A visual reminder ... or yellow works well too, but red hides the blood stains better ;-}

Re: OWWWWWW!

#4

Paul Porter

Masking tape is cheap...

Paul Porter

>...I usually wrap my chuck with a couple layers of masking tape if the jaws are sticking out past the body of the chuck. Don't ask me how many times I wacked my knuckles before I started do this. I think it takes longer for the skin to heal on your knuckles than any other place on your body.

Re: OWWWWWW!

#5

Maybe a colourful chuck cuff, cheap?

Charles R. Smith

>Some time ago, my children gave me a chuck cuff with a highly visible colour scheme that is rather akin to Joseph's coat of many colours. It was cheap (hence, something that they could afford on their weekly allowance), and when they see it in my shop they still remark on it. Lee Valley sells them for about six bucks Canadian (item 66B20.01). A good, knuckle-saving investment. And a nice gift item to put on a wish list.

Charles in Victoria (who likes his colourful cuff)

Re: OWWWWWW!

#6

Re: OWWWWWW!

Rick D.

>Get a wrist band at your local sporting goods store.

They are cheap and will effectively cover that knuckle buster.

R

Re: OWWWWWW!

#7

Dick Hines

Re: OWWWWWW!

Dick Hines

>Bill I bet everyone who has ever used a chuck has done that at one time or the other. You are not the first or will you be the last. OUCH!

Re: OWWWWWW!

#8

Re: OWWWWWW!

Mike Nelson

>Me too! It's like going around that shoulder with the bowl gouge riding the bevel on the wing, I know whats next, just seems like my brain shuts down.....

Re: OWWWWWW!

#9

Re: OWWWWWW!

robo hippy

>I will admit to doing this more than once, but it has been a while. I use a recess, and extended jaws (Vicmark). This keeps the bowl farther away from the chuck, and when expanded into a recess, nothing sticks out past the body of the chuck, or the bottom/foot of the bowl.

robo hippy

Re: OWWWWWW!

#10

Brad Vietje

Re: Masking tape is cheap...

Brad Vietje

>Bill/Paul:

Another way to use masking tape is to stick small pieces of tape to the outside of the jaws and the end of the jaw slides (which can be far worse than the jaws themselves!) in such a way that they stick out. These will act sort of like a flap sander, and give you a very gently reminder that you're getting a little too close for comfort.

I also like the multicolored, stretchy "Harlem Globetrotters Wristband" approach someone else mentioned -- you can still get a nasty rap, but you are less likely to catch your sleves, T-shirt, polishing rag, etc...

Safe spinning,

Brad Vietje

Newbury, VT