Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Favourite Species

Posts

Favourite Species

#1

Favourite Species

Hooligan

>I was turning a maple bowl today, and looked at my boxes of roughs. Got me thinking. I would say about 40% of my roughs are maple of various subspecies, and grades.

A few exoticcs, a few domestics, and a good sized bit of walnut.

What is your favourite species, and why? Is it because it is most readily available? Also, are you primarily a green turner, or do you tend to turn dry blanks?

Re: Favourite Species

#2

Re: Favourite Species

Jim Shaver Oakville, Ont.

>Hi,

I turn dry wood, i have never turned wey wood. I would say that of the Non pen wood I turn, 80% is cherry and maple...

I just love the way it cuts and the look of the finished wood.

take care,

Jim

Re: Favourite Species

#3

Re: Favourite Species

Chris K in MD

>40% Maple (most of which is soft and/or silver)

35% Cherry

20% Walnut

5% Other

Bowls - 95% wet

Platters - 50% wet

Center work - 100% Dry

I would say that I turn what I can get but have become more choosy about what wood I harvest as I never have the time to turn all I harvest.

Re: Favourite Species

#4

Re: Favourite Species

Allen Neighbors

>My favorite species... hmmm... I guess it would have to be green Red Oak, for the way it moves as it's drying out. Nope. It must be the Tasmanian Rose Myrtle, because it's so smooth and easy turning. :o)

Nope, that's not it. Bois d'Arc... that's it! Cuts like yellow butter when green, and changes to such beautiful chocolate, later. Uh - nah, that can't be my favorite, either, tho, 'cause I love Mesquite so much. Then there's the Cocobolo? Fabuloso, but no.

The easiest wood for me to get is Mesquite, but I don't think I could ever pick a favorite species. I just love wood. Natural colors - popping colors... or just unfinished. Wood. That's it. :o)

Allen

Re: Favourite Species

#5

Re: Favourite Species

Ken Oakley- Sunny St. Cloud, Fla.

>I love Mesquite and can't get enough. I love citrus woods, orange, grapefruit, tangerine, lemon,etc. Campor because it turns so nice and the smell,(AROMA), fills my shop with a wonderful smell. Walnut is nice and maple are good too. Oh and I like cherry,too

Re: Favourite Species

#6

JL

Re: Favourite Species

JL

>I'm mostly a spindle turner (legs and such).

Maple - nice smooth even grain for the most part. Takes a crisp edge and you can get a lot of details (baluster style turnings). Relatively inexpensive.

White oak - color and grain - takes good details, but a PITA to fill.

Jatoba (Brazilian cherry) - takes wonderful detail, can get nice thin legs. Not cheap.

Cherry - reasonable detail, nice color.

Hickory/Pecan - PITA to turn, but you get nice results.

Re: Favourite Species

#7

Re: Favourite Species

Norm Smith in Nova Scotia

>My favourite turning wood is birch burl, curly cherry birch, maple burl and other figured maple. I harvest most of the burls locally and purchase the figured wood at a local mill. 80% of my stuff is turned wet.

Norm

Re: Favourite Species

#8

Re: Favourite Species

Cyril Griesbach

>I'd have to say that Cherry is my favorite but I also turn the maple varities, walnut, ash and others I can get my hands on and try. I really don't care for the Oaks that much because of the splitting and cracking and warping and.... but I do turn oak.

Re: Favourite Species

#9

Re: Favourite Species

George Van

>So far (with a few exceptions) I have rough turned all green, then finished when dry. I mostly turn what is available on my woodlot. I prefer spalted wood except for some clear wood for defect free salad bowls.

50% Yellow Birch

35% Hard Maple

5% Cherry

5% other: Black Ash, walnut, White Birch, Red Maple

Re: Favourite Species

#10

Re: Favourite Species

Jennifer@Indy.USA

>I Probably turn 50/50 wet dry. Mostly local stuff. Maple, Walnut, cherry, sycamore, ash.

Re: Favourite Species

#11

Re: Favourite Species

Carole Valentine

>If it's wood, I like it. I really liked the little bit of burl (cherry and big leaf maple) that I have turned, but since that's hard to come by, I would have to say my local favorite is wild black cherry. I love the way it turns, smells and finishes. Even that is not real easy to get sometimes because it is subject to ring shake. The most predominate hardwoods here are the oaks (white and red) which also happen to be my least favorite turning woods!

Re: Favourite Species

#12

The One on the Lathe Turning Sweetly!

Ruth Niles

>

Re: Favourite Species

#13

Re: Favourite Species

Gil Jones

>I like them all. Most are turned in some stage of �wet�.

But, I like Cherry (smell), Maple (smooth cutting),

Mulberry (color), and Camphor (color and aroma) a bit better.

Re: Favourite Species

#14

Re: Favourite Species

Mike Nelson

>Gill, I have some Mulberry, I think. Is the bark relativly smooth? The sap wood on what I've got looks grayish white, aged. Turns well while wet, wharps a lot while drying. When dry the wood is hard and dulls tools quickly, does this sound like Mulberry?

Re: Favourite Species

#15

Paul Porter

Re: Favourite Species

Paul Porter

>I turn mostly found wood. So in Phoenix that would be:

� Mesquite (very stable)

� African Sumac (takes a nice polish and ages to a beautiful red-brow color)

� Medeterranean Olive (fantastic figure but very unstable)

� Carob (beautiful red color)

� Desert Ironwood (awesome figure and takes a nice polish)

I turn about half wet and half dry.

Re: Favourite Species

#16

Re: Favourite Species

robo hippy

>I turn wet 99% of the time, to final thickness, and then let them dry and warp. My favorite has to be Pacific Madrone. I had one bowl stop moving at 13 1/2 long by 9 wide, and height varying 2 inches. Very smooth even grain and colors in the pinkish to reds, purples and even blacks.It is so unpredictable. I love cherry and chinkapin (golden chestnut) for the smells. Myrtle and walnut are wonderful also. The only one that I just couldn't get along with was some palm that someone gave me.

robo hippy

Re: Favourite Species

#17

Ha! Good Answer Ruth :)

Jennifer@Indy.USA

>

Re: Favourite Species

#18

Re: Favourite Species

George Van

>I can't edit this so I guess 5% of the time I turn Nothing!

Re: Favourite Species

#19

Leo Van Der Loo

Show me the inside, and I tell you that I love it

Leo Van Der Loo

>or not, I have turned a number of tropical species when I still lived in Holland, but mostly turn local growing wood here in Ontario, I turn wet most all, but a few off-cuts that get turned later when dry, I turn first wet and return it dry when the need arises.

Wood I have turned and would turn again, it's a whole list, but I do love it all.

Maple: black, red, silver,norway, manitoba, Cherry: black, pin, sweet, Ash: white, red, green, blue, black, Locust: black, honey, Elm: white, slippery, siberian, rock, Oak: reds, whites, Walnut: black, butternut, Apple, Plum, Pear,Linden, Sycamore, Catalpa, Mulberry, Osage Orange, Hickory, Ailanthus, Lilac, Sumac, Honeysuckle, Magnolia, Buckthorn,

There must be a few more, like Yew and Juniper, Alder, Willow, Hawthorn, and Birch, I also tuned some Arbutus, that I brought along from BC, turned nice, split all to heck.

Some woods I turned that are OK to turn, but are so soft that they get damaged very easily later, like willow or poplar and also catalpa, nice crisp edges are to be avoided on those.

Have fun and take care

Leo Van Der Loo

Re: Favourite Species

#20

Brad Vietje

Hardwoods

Brad Vietje

>Gosh, seems we went through this a while back...

I turn mostly green, and of that about 50/50 once turned (oval) and twice-turned (round). I only use dry wood for occasional finials, spouts, a few plates or platters, peppermills, and the sporatic pen project.

I turn mostly found/scrounged local woods. If I had to pick just one, I'd pick Black Cherry burl. Then there's Boxelder burl, White Birch burl, Yellow Birch burl, Sugar Maple burls, and nearly any other kind of hardwood burl.

For straight-grained woods, I like Black Cherry, Sugar Maple, Yellow Birch, freshly fallen Black Walnut, and Apple. For the slightly unusual, I like Lilac (smells great, takes excellent detail for miniature work, but hard to dry), Yew (relatively unusual around here -- great colors), and Eastern Hophornbeam (Ironwood), which turns like expensive Boxwood.

Here in the Northeast we live in a forest of riches, like many areas of the country. We have so many nice turning woods that its easy to take them for granted. I live in a rural area with lots of dirt roads, and there are freshly fallen trees to be had for no more than a little lookin' & askin', and sometimes tradin'. We don't have really exotic stuff like Desert Ironwood, Mesquite, or Arbutus, but that's what turning exchanges are for!

Safe spinning,

Brad Vietje

Newbury, VT

Re: Favourite Species

#21

Re: Favourite Species

Mike Rubes, Apex, NC

>For bowls, is is about 50/50 wet and dry. Sometimes depends on what's at the store :) Wet stuff is almost always local but includes cherry, oak, ash, pecan and poplar. Dry can be anything from bubinga to zebrawood!

If I get to pick the one I love to turn most, that would be olive. I just love the way it smells and the smooth silkiness of the finish. The grain is often spectacular as well. It's just loads of fun. I even splurged last year and bought a wet hunk from eBay and it was a blast to turn wet! Really great stuff.

Mike

Currently spinning a dry cherry blank in Apex, NC...

Re: Favourite Species

#22

Keith Tompkins

Re: Favourite Species

Keith Tompkins

>Walnut got me hooked on turning in high school, still a favorite. Other favorites: Holly, ebony, mulberry, pear, sugar maple. Ziracote turns like a dream too. I do lots of spindle work, so 75% of my work is dry.

Re: Favourite Species

#23

Re: Favourite Species

David Breth

>Hi -

It's been a million years since I posted, but I still lurk and couldn't resist responding to the question. Cherry is my favorite, because I like the way it turns and really, really like the way it takes an oil finish.

David B.

Re: Favourite Species

#24

Re: Favourite Species

David Breth

>Hi -

It's been a million years since I posted, but I still lurk and couldn't resist responding to the question. Cherry is my favorite, because I like the way it turns and really, really like the way it takes an oil finish.

David B.

Re: Favourite Species

#25

Re: Favourite Species *LINK*

Gil Jones

>Mike,

Here is a pic of the bark, and a link to several pics of the wood. The sapwood (on my Mulbery)is ight colored, and the heartwood is a beautiful bright yellow that will turn to a lovely brown over time, and UV exposure.

Gil


img

http://www.hobbithouseinc.com/personal/woodpics/mulberry.htm