Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Transferring images to burn,,,

Posts

Transferring images to burn,,,

#1

Transferring images to burn,,,

Devon Palmer

>All,

I remember a post where someone recommended something other than carbon paper for transferring/tracing images onto wood for pyrography. I tried searching archives and couldn't find it.

What was it?

- Devo

Re: Transferring images to burn,,,

#2

Re: Transferring images to burn,,,

Dennis Yoder

>You can copy in reverse on a copy machine or laser printer and use an iron or other heat source transfer the image. Dennis Y

Re: Transferring images to burn,,,

#3

Re: Transferring images to burn,,, *LINK*

Rick Allen

>The link is to paper that you place between the wood and your artwork. Some artwork is more detailed than you wish to have transfered so this works well for that sort of thing. Just trace the lines you wish to transfer. If you wish to transfer all of the lines in the artwork then the method Dennis works you can also release toner from paper using a chemical. I will have to watch my Ben Pho DVD again to find out the name of the chemical.


Artisit transfer paper

Re: Transferring images to burn,,,

#4

Re: Transferring images to burn,,,

John Lucas

>Binh Pho uses some kind of pen that has a chemical. I would have to look it up also but a brush with acetone would work just as well.

Re: Transferring images to burn,,,

#5

Transfer Pens *LINK*

Jennifer@Indy.USA

>Hi Devon,

There is a special Pyrograpohy tool to be used for this. It's just called a Transfer Pen. It makes transfering inkjet images onto a platter or bowl much easier than using an iron :)

Jen


TRANFER PEN

Re: Transferring images to burn,,,

#6

Re: Transferring images to burn,,,

Dick Anderson

>Devon:

Transfer of patterns onto wood for pyrography can be dne several ways. Copying can be done using graphite paper (specifically for transfer to wood) and tracing the image to the wood. Don't use blue carbon paper as the blue color can not be easily removed.

Othere metods include heat transfer and chemical transfer. With either of these methods the transfer must be made from a laser or xerox copy and not an ink-jet copy. Only the toner from the laser or xerox will transfer. In using heat transfer it is easy to overheat and scorch the wood, so care must be used. The chemical copying (again only laser or xerox) is done with acetone or xylene. The prismacolor clear blender pen also works.

Although I have used all these methods, most of the transfering I have done was by using graphite paper. Transfering from a flat piece of paper onto a curved surface will present a challenge. Tape the graphite paper and image paper separately and in a manner that part of the paper can be lifted up to view the work in progress and tomake adjustments as necessary.

Dick

Re: Transferring images to burn,,,

#7

Re: Transferring images to burn,,,

Raymond Overman in SC

>I think it's Xylene but I could be wrong. Read the materials handling data on it though. Pretty bad stuff with prolonged exposure.

Re: Transferring images to burn,,,

#8

Re: Transferring images to burn,,,

Russ Babbitt Jr.

>I believe Binh Pho uses the "Chartpak" Blender. It is probably the same as the Prismacolor. Like others have said it may be Xylene. I was able to find Xylene at Dick Blick's Art Supply. I got the Xylene to refresh the blender when it goes dry. Another member tried the copy machine method and it did not work. Turns out that copy machine used ink jet technology. It must be a copy machine or laser printer that uses toner. If you have ever tried acetone you will find the blender pen transfers much better.

Re: Transferring images to burn,,,

#9

Re: Transfer Pens for inkjet???

Darryl

>Jen the link indicates the tool is for laser or xeroxed stuff. Have you used it on inkjet?? Darryl

Re: Transferring images to burn,,,

#10

Re: Transferring images to burn,,,

John Lucas

>If you use Xerox copies almost any strong solvent will work. Acetone, Naptha, xylene even mineral spirits and Gasoline. They just work at different rates. I use acetone because I always seem to have it around.