Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Cedar Hollow From

Posts

Cedar Hollow From

#1

Cedar Hollow From

Carole Valentine

>Easter Red Cedar. 6.75" x 3.5" I decided to go for high gloss on this one. It's Waterlox finish - natural (no finish) on the inside. It is not buffed yet because I knew I would have an even worse problem with reflection after I buffed it. Comments and critiques appreciated.


img

Re: Cedar Hollow From

#2

Whatever a hollow "From" is....

Carole Valentine

>And it's obviously "Eastern", not Easter. Where is that darned edit button!

Re: Cedar Hollow From

#3

Re: Cedar Hollow From

Barry Turner

>Very nice! I like the subtle raised lip around the opening. I can't say that I have seen very many hollow forms in cedar, but this one certainly works.

Re: Cedar Hollow From

#4

Re: Cedar Hollow From

Jennifer@Indy.USA

>MMmmm....juicy! As always....spectacular form Carole. It's a lovely piece and I like the finish. I really need to get some Waterlox and try it.

Jen

Re: Cedar Hollow From

#5

Re: Cedar Hollow From

Hooligan

>I love it. Great form, great finish, and I really like the way in which it appears to be "floating" on the foot.

Great work as always from you.

Re: Cedar Hollow From

#6

Re: Cedar Hollow From

Barbara Gill, Remlik VA

>The Waterlox worked well on your "Easter Hollow From".:-) Very nice Carole.

Re: Cedar Hollow From

#7

Paul Porter

Re: Cedar Hollow From

Paul Porter

>I like this piece. You did a good job of dealing with the reflection when photographed it. The only thing I would do different would be to have a sharper transition at the opening. The top looks little rounded over. See my illustration below. These are a little over exaggerated, but you can see what I'm talking about. I know how easy it is to sand away the sharp edge.

~Paul


img

Re: Cedar Hollow From

#8

Dick Hines

Re: Cedar Hollow From

Dick Hines

>Easter Hollow from. It sure don't look like an Easter egg to me. Great piece!!

Re: Cedar Hollow From

#9

Re: Cedar Hollow From

Tom Libby

>Newbie questions--How did you prevent checking? How often did you have to sharpen your tools? I really like red cedar, but these two probs hold me back. Preciate any wisdom.

Re: Cedar Hollow From

#10

Meant to say==beautiful!

Tom Libby

>

Re: Cedar Hollow From

#11

Re: Cedar Hollow From

Allen Neighbors

>Awesome, Carole! It's really hard to keep Cedar from checking. You did well. Must have taken forever, to sand slowly to keep those checks away.

Finish is really grand! So is the form, as always. I'm working on that part of turning... seeing.

Thanks for the inspiration you give me, Carole. :o)

Re: Cedar Hollow From

#12

Re: Cedar Hollow From

Carole Valentine

>You are exactly right Paul. That is the profile I wanted to get, but it eluded me on this cedar. I found that any sharper transition and I just could not for the life of me get the wood cut and sanded to look like the rest of the piece. The wood always looked different in the most concave area. What's the trick to that? Must be my tools...yeah, that's it! Always blame it on the tools! ;)) I finally gave up and opted for the more rounded transition before the piece ended up too short! LOL Darn, I sure wish some of you guys lived around the corner from me!

Re: Cedar Hollow From

#13

Re: Cedar Hollow From

Carole Valentine

>Hi Tom,

Did not have any problem with checking on this piece because it was oriented with fairly straight grain and only one tiny knot and the blank was far removed from the pith of the tree. You do have to use very sharp tools because cedar is a bear when it comes to tearout. I probably touched up my gouge 3 or maybe 4 times while turning the outside. That's not including all the re-grinding and honing of another gouge to try and get the neck profile I wanted, which didn't help. Stabilize any knots with CA. Take light cuts and go easy with the pressure when sanding. Cedar is a very soft wood. It will show deep sanding scratches in a heartbeat. Just go ahead and turn it and have fun! That's the whole idea. :)

Re: Cedar Hollow From

#14

Re: Cedar Hollow From

Bill Stehman

>Very nice Carole, I love cedar.

Re: Cedar Hollow From

#15

Re: Cedar Hollow From

James Brooks in GA.

>Nice work! I like it. Will the Easter eggs fit in the hole??

Re: Cedar Hollow From

#16

Leo Van Der Loo

He Allen that's what I meant the other day,

Leo Van Der Loo

>just a little shorter and a small lip on it.

Isn't this a beauty, I love the look and smell of just turned Juniper/easern red cedar.

Have fun and take care

Leo Van Der Loo

Re: Cedar Hollow From

#17

Leo Van Der Loo

Re: Whatever a hollow "From" is....

Leo Van Der Loo

>This "Hollow from" is just magnificent Carole.

Love the form and color, and what we do not see, the smell, you must have a delicate hand to get that soft wood to show no sign of pressure, really nice.

Have fun and take care

Leo Van Der Loo

Re: Cedar Hollow From

#18

Paul Porter

Re: Cedar Hollow From

Paul Porter

>Hi Carole, I know exactly what you mean. If I'm having difficulty I'll use a smaller gouge and sometimes I end up cutting the neck off and using a collar. ;>)

Re: Cedar Hollow From

#19

Hmmmmmm

Barbara Gill, Remlik VA

>Interesting. I never thought the rim was a mistake. I thought it was a different approach which I liked on this particular form.

Re: Cedar Hollow From

#20

Brad Vietje

Re: Hmmmmmm

Brad Vietje

>Barbara's certainly right -- its beautiful the way it is, and the change Paul suggested would be another approach that would also be a winner.

One problem in sanding out these concave transitions (to the sharp rim) can be caused by the heel of the bevel -- if its not softened or rounded over somehow, it can "bruise" the wood fibers when scooping out this curve, especially with softer woods, which can be hell to sand out.

I guess Carole will just have to treat us to another with the opening Paul suggested, so we can compare !

Safe spinning,

Brad Vietje

Newbury, VT

Re: Cedar Hollow From

#21

Andy DiPietro

Re: Cedar Hollow From

Andy DiPietro

>Love It, Can you post a top view so show off the grain and color?

Re: Cedar Hollow From

#22

Re: Cedar Hollow From

Carole Valentine

>Thank you Andy and everyone for the kind comments. Andy, here is a pic of the top. Sorry about the blue sky reflection from the window! I usually take pics at night.


img

Re: Cedar Hollow From

#23

Andy DiPietro

Re: Cedar Hollow From

Andy DiPietro

>Even more beautiful from that camera angle. I have to put a cedar Hollow form on my to do list. I think the collar looks better also.

Thanks

Re: Cedar Hollow From

#24

Re: Cedar Hollow From

RevDoug

>Super job, Carole. This is the second piece I've seen tonight that had the orange streaks in cedar. You did a real nice job with it and brought out the inner beauty of the wood.

Turn 'em round,