We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Well a bark inclusion got me again. I've tried everything to prevent this from happening, CA, stretchy tape wraped tightly around it and very little pressure when bending. I just can't bend a hat with a defect like this. I need some ideas... how would you keep a defect like this from splitting?
I don't think you could do a thing, aside from selecting a different piece of wood. I've run into a bark inclusion when I selected a piece with really neat figure -- caused by whatever caused the bark infolding, and I suppose that's the risk I ran when selecting a more figured piece. Sometimes it looks like the bark will turn away, but it just doesn't. In a bowl that might be a dramatic accent that adds interest, but in a thin-walled hat that has to be warped into shape/fit, it certainly makes your life difficult.
I've seen the way JoHannes Michelsen bends his hats on a wooden frame with rubber bands... could you save this by essentially pressing it into another, somewhat thicker hat with a sandbag or two inside it ? In other words, by pressing instead of squeezing. Could even use hot or warmed sand to aide the process... ?
>When I see a bark inclusion in the wrong place on the hat it's time to quit and start over. Johannes is talented enough to work around defects or to design a hat that high lights a flaw in the wood. This started as a small inclusion but kept growing.
I figured this art was priceless so it went in the trash.