Is there a Topic for Wednesday?
Ron in Drums PA
>
Knowledge You Can Build On — Est. 1998
Is there a Topic for Wednesday?
Ron in Drums PA
>
Good question
TDaniel
>Last Wed was for items that were carved, burned, textured, or whatever but we had no pics to look at so the chat became an open topic night. This week is for items that used a lathe in the making at some point but minimally. These are items that would best be described as "wood art" rather than turnings. If we don't have any pics to discuss then we will talk about lathe modifications. Pics should be sent to ron@simplyturning.com
Re: Good question
Russ Fairfield
>I sent a picture, so you will have at least ONE.