24" Bowl
James Brooks in GA.
>200 year old magnolia bowl 24" in diameter and 9" high. Finished with Tung oil. I haven't turned as much as I would like. But I tried to make it count.
Knowledge You Can Build On — Est. 1998
24" Bowl
James Brooks in GA.
>200 year old magnolia bowl 24" in diameter and 9" high. Finished with Tung oil. I haven't turned as much as I would like. But I tried to make it count.
Re: Fabuloso!! Prima!! Ser Gut!!
Allen Neighbors
>
Re: 24" Bowl
Jennifer@Indy.USA
>Lovely bowl James. It's grand size and lovely form make it a fabulous piece. You must be really proud of this one. It must have been a load to get onto the lathe!
Jen
Nice bowl, I count close to 70 growth rings ??
Leo Van Der Loo
>
The VB finally gets a workout?
TDaniel
>Nie job JB!
Re: 24" Bowl
Barbara Gill, Remlik VA
>Nice bowl James. How much do you think that blank weighed? I estimated the 18" diameter ones I rough turned weighed about 80#. Were you able to lift the blank to the lathe or did you rig up some help?
Re: 24" Bowl
Bob Fawcett
>Beautiful bowl James.
Re: 24" Bowl
Dave Belser
>Beautiful!
You have been turning for 200 years?! - Oh I get it the tree was 200 years old :)
What a beauty!
Carole Valentine
>
Re: Nice bowl, I count close to 70 growth rings ??
James Brooks in GA.
>The rings are hard to count on the bowl. This bowl was several feet up the tree. The spalting covered a lot of the rings. I actually counted the rings on the stump of the tree after it was cut.
Re: 24" Bowl
James Brooks in GA.
>Thanks Barbara. The blank was almost 30" when I started and was wet, even though it had been dead for some time. I would guess it weighed almost 300 pounds. I also have a tractor with a front end loader but I used a 1 ton hoist mounted above the lathe to load it onto the VB-36
Re: The VB finally gets a workout?
James Brooks in GA.
>Now I know why you don't turn many large bowls any more. They will beat you up!!
Thanks all !!! NM!
James Brooks in GA.
>
Thanks James.
Barbara Gill, Remlik VA
>