Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Video setup for your clubs

Posts

Video setup for your clubs

#1

Video setup for your clubs

Mkauder, Phenix City, AL

>I thought I posted this question before, but I can't seem to find it.

Our club is in the active search and buy mode to get a wireless audio system, and a multi-camera video system with video projector rather than TVs.

I would like to hear what some of you guys use at your clubs. I like the Woodchucker's systems for stationary cameras and their audio system seem about right. Prices are good too. For the mobile camera, I have an old VHS-C camera that zooms and all, that I am giving to the club.

BTW, the TVs are out because of the lack of storage available to the club. In the near term, we will be using a video projector that I can borrow from work.

Thoughts?

Mark

Re: Video setup for your clubs

#2

Re: Video setup for your clubs

Gary in Zirconia, NC

>Mark,

Check out my response to this issue on the 25th of August, 2006.

If you have other questions, I will try and help.

Gary

Re: Video setup for your clubs

#3

Re: Video setup for your clubs

Cyril Griesbach

>Mark,

Our club uses TV's and a two camera system for video and we can also record on the system. I don't know much more about the products we use but this weekend I believe we will be building some storage cabinets for the TVs which will also serve as stands as well as storage so we don't have to haul them back and forth.

We do need some sort of audio system and would like to know more about the system you're looking at.

Cyril

Re: Video setup for your clubs

#4

Re: Video setup for your clubs

Mkauder, Phenix City, AL

>Thanks for your help, Gary. I don't know why I did not find that thread when I searched.

Mark

Re: Video setup for your clubs

#5

Never Mind - Gary found the tread for me.

Mkauder, Phenix City, AL

>

Re: Video setup for your clubs

#6

Re: Video setup for your Golf clubs?

georgetroy

>

Re: Video setup for your clubs

#7

Re: Video setup for your clubs

Duane C.Leach

>About 2 years ago our club bought two mini video cameras, switch box,through Woodchuckers supplies.We already had a tv. To mount the cameras above the lathe we bought a boom with a tri pod on each end from ebay. total cost was under $250. If you go this route get different lens for the cameras.

Happy turning

Duane

Re: Video setup for your clubs

#8

Re: Video setup for your clubs *LINK*

Tom Reiman

>Here is a link to the AAW Best Practices site for an article that I wrote regarding audio/visual presentation that we use at Northwest Woodturners.

We buy color zoom camera's through Ebay and link them through a mixer to both TV's and a projector.


http://http://www.woodturner.org/community/chapters/practices/audio_video_017.pdf

Re: Video setup for your clubs

#9

Re: Video setup for your clubs

00lightning

>Our club, Coastal Bend Woodturners, received free of charge a complete audio visual system consisting of the mixer, tape recorder and six minature cameras from the regional SouthWest Association of Turners (SWAT). The only requirement is that the club video the annual SWAT symposium for two years. You might want to check with any regional clubs to see if they have similar programs.