Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

New (to me) Lathe & some questions.

Posts

New (to me) Lathe & some questions.

#1

New (to me) Lathe & some questions.

Larry Clinton in Frankfort, Indiana

>First I want to thank those who answered my question about the Powermatic 90 Lathes from a school sale. I did end up buying 2 of the lathes. They are now in my shop. I and my son are in the process of cleaning / repainting one of the lathes. I found a very close match to the Powermatic gold at a local auto paint store. The lathe was a 3 phase, I investigated installing a VFD but ended up orderering a new Leeson single phase motor. I will rewire tomorrow for the single phase motor. The lathe should be in operation in a week or so. The lathe is equiped only with a spur center on the drive spindle. Tailstock dead center was lost during the transfer to my shop. I would like to know what you experts recommend for a tailstock center. I have looked at live & dead centers as well as live center sets. I would also like your opinion as to what chuck would be best for this lathe. Not sure what will be turned, probably everything from christmas tree ornaments, candle sticks to table legs. I also will be selling the extra lathe, thought I might need parts but ended up one lathe was complete. The second lathe has a knob on the speed selector, the bolt for the tailstock, and the tool rest is missing ( tool rest holder is complete - just the rest itself is missing.) Both lathes are in pretty good shape. I may take the second lathe to the Indyfest if anyone is interested - I have $200 invested and will sell it for that. I will post on the classifieds unless someone wants me to take it to the fest.

Re: New (to me) Lathe & some questions.

#2

Re: New (to me) Lathe & some questions.

Dennis Yoder

>Can't go wrong with the oneway live center. Have fun and welcome to the addiction. Dennis Y

Re: New (to me) Lathe & some questions.

#3

Re: New (to me) Lathe & some questions.

Wilford Bickel

>The last time I replaced my live center I researched and actually tested in the Woodcraft store and the truest running unit was the Oneway. I have no regrets from spending the money on mine!!

Re: New (to me) Lathe & some questions.

#4

Re: New (to me) Lathe & some questions.

Russ Fairfield

>Be prepared to buy a large chuck like the Oneway Stronghold. If I remember correctly, the 90 has a 1-1/2" x 8 spindle thread. That will limit your choices to a chuck that is large enough to accomodate an adapter with that thread, and has one in that size available. You will probably find that the Stronghold is the only one available.

Re: New (to me) Lathe & some questions.

#5

Re: New (to me) Lathe & some questions.

Larry Clinton in Frankfort, Indiana

>Thanks for the replies. I will order a live center - I wasn't sure it dead center would be as good. I may get a cheap one from Highland Hardware to start out & see if we want the oneway set. I will look at the oneway chuck - know their prices are pretty high and I am somewhat limited on budget right now.

Re: New (to me) Lathe & some questions.

#6

Re: New (to me) Lathe & some questions.

Hooligan

>I'd go to a stronghold, or Axeminster chuck. The 90 is 1 1/4"-8TPI, and almost all manufacturers have inserts for the lathe, as its a common size.

Revolving centers, just like everyone else, I'd be going for the OneWay. There are sets, like the sorby, but I really don't think that they perform as well.

Also, if you run into the situation that you want a riser for the lathe, they are out there and available. It would take you up to 16" capacity.

Congratulation's, that's a great buy!

Re: New (to me) Lathe & some questions.

#7

Re: New (to me) Lathe & some questions.

Bob Fawcett

>If the thread is 1 1/4 x 8 you could use a OneWay Talon. I have one and the insert that I use on my PM3520. Its fine for all but the largest stuff. For that I have a Stronghold.

I bought the Talon for my Jet mini, but when I got the PM I bought an insert so I could use it. It was the only chuck I had for a while.

Re: New (to me) Lathe & some questions.

#8

Re: Thanks - threads are 1 1/2 X 8 on inboard

Larry Clinton in Frankfort, Indiana

>end of the spindle. Guess the Stronghold is the one I will be saving for. Appreciate all the comments / help. I did have a problem with the spindle lock, it wouldn't engage. There is an "interlock pin" that won't let the spindle lock engage without the speed selector lever in the slowest position. It was stuck and wouldn't let the lock engage. I made a new hardened pin and installed it yesterday. We finished repainting the lathe today. The new single phase motor will be delivered Tuesday so should have it running before the Indyfest. My son & I have both been lurking here a while. I've been a regular on the flat side for several years -long before the pond went dry, but haven't much experience with spinning stuff. I'm sure I will have a lot of questions before I turn anything I will show anyone.