Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Another beginner's Firstlings....

Posts

Another beginner's Firstlings....

#1

Barb Siddiqui

Another beginner's Firstlings....

Barb Siddiqui

>Well, Marianne was brave enough to post her early turned work, so here is a pic of my

practice pieces so far. The candlestick is unfinished, a piece of holly Dave Smith gave me on top of a birch base. The middle bowl (4"d.) is birch with a 'design opportunity' button of turquoise glued into the center, where I unwisely left a little dimple that showed badly after finishing. The red bowl on the left (4.25"d.) is the padauk Russ Fairfield helped me with. The walnut at the base of the lathe is highlighted in gold leaf (by Russ) where I went too thin trying to get rid of ridges and al-l-l-most went through it during a catch. One tool handle of apricot, and the footed stand behind the lathe to hold small parts, is the output so far. Where do I go from here? More of the same, until I get one I'm proud of! Sure having fun, though. I'm also chainsawing some orchard cherry blanks and sealing them. Can't remember where I put my tablesaw. I think it's buried under wood somewhere here.


img

Re: Another beginner's Firstlings....

#2

Re: Another beginner's Firstlings....

ad de Crom

>Hi Barb,

You are on the right trail, seems to me very nice work.

A pity that I cannot look to it closer.

Keep up your good work!

Ad de Crom The Netherlands

Re: Another beginner's Firstlings....

#3

Re: Another beginner's Firstlings....

Barbara Gill, Remlik VA

>You are really going to town Barb. Keep up the good work and turn what you enjoy.

Re: Another beginner's Firstlings....

#4

Re: Another beginner's Firstlings....

George Van

>Hi Barb, it appears you are having a lot of fun and getting guidance from some well qualified turners. Continue to have fun and turn safe!

Re: Another beginner's Firstlings....

#5

Brad Vietje

Re: Another beginner's Firstlings....

Brad Vietje

>You're off to an excellent start, Barb -- now how do you plan to use that table saw on the lathe? ... ;-)

Safe spinning,

Brad Vietje

Newbury, VT

Re: Another beginner's Firstlings....

#6

Re: Another beginner's Firstlings....

Carole Valentine

>Good work, Barb. Looks like we got another one! LOL No need to say "Keep it up" because I think you are definitely hooked. Just wish the pic was a little bigger so we could actually "see" the pieces. (hint, hint!) So when is the Oneway arriving? ;)

Re: Another beginner's Firstlings....

#7

Barb Siddiqui

Thanks, everyone

Barb Siddiqui

>You're getting ahead of me Carol! Oneway indeed.

I have no digital camera right now (dropped it off the top of a car on the road when making an ER run with a grandchild last summer) so pix will be few and far between for now. I'll post one of something I'm happy with later! Thanks for all the encouragement!

Re: Another beginner's Firstlings....

#8

Re: Another beginner's Firstlings....

Allen Neighbors

>Be proud, Barbara... you're turning. Stay at it, and you'll stay happy. Looks good from here!

Allen

Re: Another beginner's Firstlings....

#9

Resistance is futile. Gotcha! LOL

Dave Smith, Longview, WA

>

Re: Another beginner's Firstlings....

#10

Barb Siddiqui

And Boy Howdy, did you ever.....

Barb Siddiqui

>

Re: Another beginner's Firstlings....

#11

Re: Another beginner's Firstlings....

Marianne

>Very nice. I too have a bowl that needed just a few more swipes but in my case chickened out [I had a good catch and it was such a nice piece of wood I hated to see it go into the fireplace bin]. It was a lesson to learn that a minor bump in the bottom of a bowl is beacon in light.

I've been offline for a few days. Mom and I are in Hershey [chocolate heaven at the CATS festival]. Great time. Marianne

Re: Another beginner's Firstlings....

#12

Barb Siddiqui

Thanks, Marianne

Barb Siddiqui

>Chocolate's good for the heart, they say. Any excuse will do....