Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Spindle Tap

Posts

Spindle Tap

#1

Spindle Tap

Tom Storey

>I tried to order a 1 1/4 x 8 tap from JR Beal a few months ago and was told the ones they had were flawed. I think a few on this forum had the same response. I checked again a couple of weeks ago and JR sent me one of the new taps for a user trial. Works great, just like advertised and apparently they now have all the popular sizes in quantity.

No affiliation, just a happy customer

Re: Spindle Tap

#2

Re: Spindle Tap

Allen Neighbors

>Thanks for the info... you said, "... all the popular sizes." I wonder if 33mm X 3.5pitch is popular. I guess I need to give them a call.

Thanks, again.

Allen

Re: Spindle Tap

#3

Re: Spindle Tap

Greg in Oshkosh

>got a 33mm from him a couple months ago. Works great

Re: Spindle Tap

#4

Re: Spindle Tap

Allen Neighbors

>Greg, mind telling me about the price?

Re: Spindle Tap

#5

Re: Spindle Tap

Bob Fawcett

>Allen,

The web page shows $38.50, also it says "temporarily out of stock". I paid about $60 for my 1 1/4" 8 tpi tap from an industrial supplier. McMaster Carr lists a 33 x 3.5 for $140. I would call Beall and wait till he has stock.

Re: Spindle Tap

#6

Re: You're right, Bob,

Allen Neighbors

>Last time I checked on the price of a tap with OW threads it was a little over a hundred bucks. $ 38.50 sounds exceptional. Just threading wood, it might even last!! :o)

Thanks, c ya down South.

Allen

Re: Spindle Tap

#7

Re: If you need a metal cutting tap, it is $55.94

Al Crandall (NE of Indy)

>WWW.jtsmach.com has the m33x3.5, item 1-373-140 for $55.94, and the 1 1/4-8, 1-372-420, for $43.85. I bought spindle taps and dies for both my lathes from them.