Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

my weekend with Alan Lacer

Posts

my weekend with Alan Lacer

#1

my weekend with Alan Lacer

Tom Sontag - St. Louis

>The St. Louis Woodturners had Alan Lacer in for a demo on Saturday and workshop Sunday. And I was there! While this alone will not vault this furniture guy into 100% lathesville, it certainly was the nudge I needed to focus on how and where to practice some more with less frustration. As you would expect, it was all about the skew, with a short detour on the hook tool.

His theory seems two pronged: 1 - the skew is too useful to not learn how to use, and 2 - if you can control the unforgiving skew, you can handle most other tasks. This makes sense.

He showed how he makes hook tools, which apparently cannot be bought. Despite their incredible usefulness in shearing end grain cleanly, the closest you can get to buyng one is a circular hoop. Apparently these things catch rather spectacularly and liability issues keep manufacturers away. Just this metal-working demo included enough information to convince you this guy knows his stuff. Heck, he came from a smithing family.

We began the workshop portion today with grinding and honing. He prefers a rolled off profile on the two thirds of the skew on the short point. In other words, straight edge at 30 degrees off the long point, then rolling over a bit to the short point. This grind alone kept me from digging in so much when using the paning cut by exposing a sweet spot on the edge. His website shows this and virtually anything else I would try to describe to you.

I confess that I am not yet the skew's master. Rolling a bead is going to get some more practice. And my pride wants to make one of the eggs he had us attempt at the end to demonstrate our rolling cut and aesthetic talents. But Alan was a clear and thorough teacher that most of the experienced turners also learned plenty from. I hope I can remember it all!

Re: my weekend with Alan Lacer

#2

Re: You can buy a HSS hook tool......

Jamie Donaldson

>....cutting bit from Michael Hosaluk. It fits in the end of my Oland style tool shaft, and I even use it occasionally!

Re: my weekend with Alan Lacer

#3

Re: my weekend with Alan Lacer

Russ Fairfield

>McNaughton also make a good hook-tool. And, don't forget Andre Martell's hook tool.

Re: my weekend with Alan Lacer

#4

Re: my weekend with Alan Lacer

Barbara Gill, Remlik VA

>When I took a class at John Campbell I chose one that Alan was teaching. As you said it was a very productive experience. Along with skew work and all the other basics we made his hook tool. I love using it.

Re: my weekend with Alan Lacer

#5

Brad Vietje

Re: my weekend with Alan Lacer

Brad Vietje

>I had a great time with Alan a few months ago at the New England Wood Turning Symposium, where a number of the demonstrators shared a house for the weekend, and spent some time with him going over his new skew grind -- straight across for 1/3, then a gentle curve angled 20 degrees from the first section, with the bevel length ~1.5 times the tool thickness. He's a very talented demonstrator, too. Just for fun, ask him how he feels about round skews... Oddly enough, my roomate for the weekend was Andre Martel, of Martel Hook Tool fame, who's a real nice guy, too. I'm just constantly reminded that woodturners are a great bunch of people !

Practice with that skew...

Safe spinning,

Brad Vietje

Newbury, VT

Re: my weekend with Alan Lacer

#6

Re: Jamie, do you have a link?

Allen Neighbors

>

Re: my weekend with Alan Lacer

#7

Re: I can't find him.

Allen Neighbors

>I've googled and coperniced, and can't find a Webpage for him or his tools. Found a lot of Galleries that like his work... :o)

I think I would like to pick up one of those hook tools.

Re: my weekend with Alan Lacer

#8

Re: You can buy a HSS hook tool......

Mike DeLong

>I bought my Hosaluk hook tool from Bruce Hoover at the AAW Symposium in KC last year. If you go to his Sanding Glove website http://www.thesandingglove.com/ and download the .pdf catalog you will find it for $25. It works fine and is easy to sharpen. Since then I have seen an Alan Lacer demo and made some of his hook tools. They work great also, but the construction process, while pretty simple, does take time and practice.

Mike

Re: my weekend with Alan Lacer

#9

Brad Vietje

Re: You can buy a HSS hook tool......

Brad Vietje

>A few years back, Michael Hosaluck was using hook tools made by Mitch Wolok. I have the medium sized Wolok Hook Tool, but haven't found the brochure with the address and #'s. You might find the Wolok hook tools by searching the web -- I haven't searched yet. His tool is a pretty standard design and easy to use, though maybe not as adaptible as the Martel (which I use more often). It requires a drilled center hole. I can't be sure I'm spelling the name correctly; I'll do a search and post the link if I find it.

Safe spining,

Brad Vietje

Newbury, VT

Re: my weekend with Alan Lacer

#10

Re: Thanks, Mike and Brad

Allen Neighbors

>

Re: my weekend with Alan Lacer

#11

Re: Sorry I wasn't much help Allen!

JamieDonaldson

>

Re: my weekend with Alan Lacer

#12

Re: No sweat! :o)

Allen Neighbors

>

Re: my weekend with Alan Lacer

#13

Re: Sorry, Tom. My error.

Allen Neighbors

>Tom, thanks for an informative post. Sounds like you really had a good time!

Sorry, I got carried away with Jamie's post, with hook tool in the subject line, I didn't even read your post until now. I'd made a hook tool using Darrell Feltmate's instructions, and loved the way it worked... (wasn't good at it, just loved it..) and broke it after about the third or fourth time I used it. I wanted another, but didn't want to take the trouble to make it.

About the skew: I've seen two videos, and Ruth Nile's demonstration in Georgia, and I still can't use it. :o(

Have fun... but watch out. You'll get 'hooked' by this addiction to woodturning. :o)

Allen