Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

treadle lathe

Posts

treadle lathe

#1

treadle lathe

john lucas

>Here is the treadle lathe. Done except for rigging a belt and possibly some sort of guide to keep the treadle from moving in and out. It feels better when it's moving up and down but kind of hard to do on your own.

Hope it works. I used bearings in all the drive train so everything moves pretty smoothly. Still I was purely guessing on the size of the wheel, the length of the drive arm, and the size of the small pulley.

I've only got 2 more evenings to make it work so hopefully nothing will go wrong and I can find some material to make a belt. There aren't any leather shops around but I'm going to search some of the places that sell gear to horses tomorrow and maybe I can find some leather.


img

Re: treadle lathe

#2

Re: treadle lathe detail

john lucas

>Here's a detail. I made the wheel out of plywood. I will make a wagon wheel sort of drive wheel when I have more time. I'm also going to replace the V belt pulley with a flat drive of some sort.


img

Re: treadle lathe

#3

free standing tool rest

john lucas

>I built this so I could turn the big wheel. It needs work. It's a little too light and the pipe I used flex's a little. It worked but I had to fight it. I'll make some improvements later and let you know how it worked. It would be better attached to the lathe of course but for now that's what I had handy.


img

Re: treadle lathe

#4

Re: free standing tool rest

tm

>shes a beauty

tm

Re: treadle lathe

#5

Why not link belt?

Dominic Greco in Richboro PA

>Hey John,

Can't you use a setion of link belt rather than getting a custom leather drive belt? If you're concerned about traction between the wooden wheel and the belt, wrap the wooden wheel in an old bike tire before applying the link belt.

Unless of course, you're going for a "traditional" treadle lathe. Then link belt would be most un-authentic!

See ya around,

Dominic

Re: treadle lathe

#6

Re: treadle lathe

Jorge Castaneda

>Good going John,

I think the treadle should be 90 degrees to the spindle, a lot easier constructiond and operation.

Re: treadle lathe

#7

Re: treadle lathe

Carole Valentine

>That looks really cool, John. I laugh every time I think of Dave Probst trying to use the treadle lathe at the Gathering! LOL It's sort of like rubbing your head and patting your belly.

Re: treadle lathe

#8

Serpentine belt??

Brian Simmons, Heflin, AL

>I have an old Logan metal turning lathe that was driven by a leather strap. When it broke, I replaced it with a serpenting automotive belt. It can be sewed or connected using conveyor alligator links. You might get lucky and be able to but one the right size. Good luck

Re: treadle lathe

#9

Re: treadle lathe

Bill Luinetti

>Verry nice, John.

So what do you do with your spare time?

Bill

Re: treadle lathe

#10

Re: Why not link belt?

john lucas

>Dominic I may look at link belts but they are expensive. My local bearing supply place has lots of belts including link belts. That will be my place to go if I can't find the leather belt.

Re: treadle lathe

#11

Re: treadle lathe

john lucas

>In the long run a rocking type drive is what I will put on this thing. With a drive that only pushes down you lose power on the upstroke. I just don't have time to build it right now unless I don't have a choice. I don't do late nights very well but if that's what it needs to run I'll have to buy a case of cokes and hand in there till it's done.

Re: treadle lathe

#12

Re: treadle lathe

john lucas

>You should try a spring pole lathe, it's even worse. You have to move the tool in and out to the rythm as well as stomp your foot.

Re: treadle lathe

#13

Build and rebuild more lathes.

john lucas

>

Re: treadle lathe

#14

Flywheel

Jorge Castaneda

>John to keep the momentum is nice to have more mass, a heavy flywheel will help not to loose the momentum and you just push on the downstrokes.

Re: treadle lathe

#15

Re: treadle lathe

Pete LaBelle

>I have a belt lacing fixture if you find a belt and can't get it laced. Also, look in a Machinery's Handbook. Seems they still tell how to lace a belt with leather strips.

Re: treadle lathe

#16

Steven Antonucci

Hook it up to a bicycle chain drive

steve antonucci

>you could have 24 speeds!

We could also patent the training tapes with something catchy like:

"Turning and burning (calories) with John"

"Spinning spindles with John"

"Cycloturning with Lucas"

Steve :-)

Re: treadle lathe

#17

Re: Flywheel

John Lucas

>I thought 2 thicknesses of plywood would work for that but it's pretty sluggish on the up stroke.

Re: treadle lathe

#18

Re: treadle lathe

John Lucas

>Pete Thanks for the offer. I'm a fairly decent leather worker so I believe I can sew it up successfully. Just gotta find it around here.

Re: treadle lathe

#19

Spinning with John feel the burn I like it.

John Lucas

>

Re: treadle lathe

#20

More Weight!

Mark Mandell - Gone Round In Jersey

>John,

Suggest you add more weight to the rim of your flywheel, say 30lbs or so, to increase its inertia once up to speed. This is easily done by drilling 1-1/2" holes near the outer rim at precise compass points and filing them with lead or tin. You can then dynamically balance the wheel by drilling into the various plugs to remove a bit of metal.

Re: treadle lathe

#21

Re: More Weight!

John Lucas

>I'm on my way to my mechanics business to get some lead wheel weights. For now I'll have to just screw them on. Won't look very good but I'm running out of time and options. I have to work 3 nights this week so I may be pulling an alnighter to get this thing running correctly.

Re: treadle lathe

#22

Keith Tompkins

Re: More Weight!

Keith Tompkins

>Hey John, pretty cool! Did you consider an automotive flywheel? the hole is perfectly centered..the teeth for the starter could be used as an indexing mechanism. Heavy too.

Re: treadle lathe

#23

Re: More Weight!

john lucas

>Keith I think I'll just hook up the starter and forget this leg power thing. :)

Re: treadle lathe

#24

Keith Tompkins

HAHAHAHAHA!

Keith Tompkins

>

Re: treadle lathe

#25

Re: treadle lathe

Allen Neighbors

>You're amazing, John. Treadle Lathe... what else is next...?

Fine looking, even with the ply wheel. :o)

Keep us posted..

Allen