Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Bowl Gouge Value

Posts

Bowl Gouge Value

#1

Bowl Gouge Value

George (Oxford, NC)

>I don't have any old WoodCraft catalogs from when they carried gouges under their brand name so I can't research this. I saw a 5/8" bowl gouge yesterday for sale, on the shaft it had WoodCraft HSS - UK. Don't know who made it for them or what it sold for new or what it would be worth today. Any help appreciated. Oh, it had a standard grind on the end so it would have to be reground to put a fingernail or Ellsworth grind on it.

George

Re: Bowl Gouge Value

#2

Re: Bowl Gouge Value

Mike Cunningham (Cape May NJ)

>I don't know how much they sold for. I'd compare it to like sized gouges currently on the market and make a decision based upon that.

Mike

Re: Bowl Gouge Value

#3

That's The Problem

George (Oxford, NC)

>Do I compare with Sorby, Crown or Benjamens Best?

George

Re: Bowl Gouge Value

#4

Re: Bowl Gouge Value

Nelson

>Are you trying to sell or what?

Re: Bowl Gouge Value

#5

Re: That's The Problem

Mike Cunningham (Cape May NJ)

>I'd venture to say that it's a step up from benjamin's best. If I needed a bowl gouge that size and the cost less than Sorby et al, I'd consider buying it. However, having said that, if I needed a tool I'd buy a P&N.

Re: Bowl Gouge Value

#6

Richard Allen

Re: Bowl Gouge Value

Richard Allen

>Hi George

The Woodcraft store brand was made by Crown. They generaly sold the store brand for 10% less than other folks would sell Crown tools for.

Re: Bowl Gouge Value

#7

Re: Bowl Gouge Value

George (Oxford, NC)

>Found one that was being sold by a widow. I picked it up today for $50, hope I didn't pay too much and was still fair to the widow. It had just a plain grind on it and as I haven't done bowls yet, I'm not sure what I'm doing but am attempting to put a fingernail grind on it , hope I don't mess it up too bad.

George

Re: Bowl Gouge Value

#8

Keith Tompkins

Re: Bowl Gouge Value

Keith Tompkins

>George, it should be a fine bowl gouge. Just a thought...why not leave the grind as is? I feel it's much easier to learn with a conventional grind than a swept back design. Far easier to sharpen as well, just make sure the upper edges of the grind is swept back a bit.