Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Advise me oh Great Peers

Posts

Advise me oh Great Peers

#1

Advise me oh Great Peers

Hooligan

>I have a maple vessel sitting rough turned in the shop. I wanted to keep the pith of the log, because it is so incredibly red, think blood red. Thus far, five that I have roughed are drying, showing no signs of checking out. One, however, is starting to crack right at pith center. Its the piece I like the most, of course, because of the form, and the fact the fact that the pith of the log looks like a butterfly has wrapped itself around the piece, albeit a large butterfly....

Aaaanyhow... shall I turn it, without further drying down, taking the chance on having it go all sorts of wonky and exploding, or shall I try to nip the cracks with glue, and hope that it will stay well enough that I am able to work with it?

For the record, some of the same maple that this came out of has been turned for three months, and is showing do sign of distortion. It is staying very well in shape, and not cracking.

I can't post pictures, because I am in class, waiting for the rest of the class to get done with an exam that I have been done with for twenty minutes........AAARG!

Re: Advise me oh Great Peers

#2

Brad Vietje

Re: Advise me oh Great Peers

Brad Vietje

>Good luck on the exam, Sir Hooligan !

I do this pretty often, and usually hit the pith witha a few drops of CA even before any cracks start to show. I would definately get some CA in there when checks do show up. Usually, a hollow vessel turned on the pith will crack least when turned to completion in one go, and more quickly is usually better than working slowly. The fact that you're in one place, and the vessel somewhere else would be worrysome to me -- I'd bag it in plastic, or wrap it in Saran Wrap before even going to get a cup of coffee. Your success so far with this wood may be related to the red color -- the core of the tree has probably begun to die and degrade somewhat, rendering the wood a little weaker, and allowing it to flex more than crack -- just a guess, though. If you're working with a chuck and tenon (with the pith through the tenon), you shouldn't have problems of it breaking up unless there are other defects in the wood, but you could wrap it in plastic and/or tape if you're worried.

In my experience, a pith crack that has started will only get worse if allower to season as-is. If it were mine, I'd glue it at once, and hollow it to final thickness, and pretty thin at that, lickedy split (um, so to speak).

Safe spinning,

Brad Vietje

Newbury, VT

Re: Advise me oh Great Peers

#3

Re: Advise me oh Great Peers

TDRice

>I agree with Brad. I think that the sooner you get some CA on it and get it thinned to final dimension the better off you will be.

Re: Advise me oh Great Peers

#4

Re: Advise me oh Great Peers

Hooligan

>Brad and TD, that's kind of what I was thinking. Before I wrapped up this morning, I had already glued it up, and wrapped it in saran, with the intent of finishing it tonight.

I figured that I'd ask, as one never knows the best answer until you hear it from someone else.

Re: Advise me oh Great Peers

#5

Re: Advise me oh Great Peers

Hooligan

>Its pretty. That's about all I can say. It turned out really nice. I had to come inside, because my bride had somewhere to go. I got it thinned down to a wee bit over 1/8", without it wanting to explode on me.

I'll finish sanding, and get a couple pictures of it later tonight, I hope.

Re: Advise me oh Great Peers

#6

Re: Advise me oh Great Peers *LINK*

Darrell Feltmate

>Reply form a lesser peer:

Go for it. Turn the piece and pray. At worst you have some great turning fun, the pleasure of turning pretty wood, and some fine kindling.

At best you have a great piece that dries without cracking and some great gloating rights.

Somewhere in between you get a piece with drying cracks but not a heap of glue everywhere and some design opportunities along the way.

Sounds like win win to me.


Around the Woods

Re: Advise me oh Great Peers

#7

Re: Advise me oh Great Peers

Hooligan

>Pictures posted.

And Darrel, I dig your site. Lot of good info there, for beginners, and vets alike. Kudos to you!