Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Spindle Adaptor

Posts

Spindle Adaptor

#1

Spindle Adaptor

Thad Parker

>Does anyone know where I could find an adaptor for converting a 5/8" shaft to 1" 8tpi (or other common thread)? Does such a thing exist or should I try to have something fabricated? I'd like to be able to use different faceplates and eventually chucks, but I cannot find anything that just fits on a 5/8" shaft with a set-screw, so an adaptor seems the logical thing to try. Any suggestions would be most appreciated.

~ Thad

Re: Spindle Adaptor

#2

Re: Spindle Adaptor

Dennis Yoder

>Try Bestwoodtools.com, Dennis

Re: Spindle Adaptor

#3

Re: Spindle Adaptor

Karl in IA

>Shopsmith has face-plates with a 5/8" set-screw. Other places also have them. Hope this helps.

Re: Spindle Adaptor

#4

Re: Spindle Adaptor

Gary in Zirconia, NC

>Penn State has them at $19.95.

Re: Spindle Adaptor

#5

Re: Spindle Adaptor

RevDoug

>You can get face plates from ShopSmith as mentioned. Most all the chuck makers have inserts for adapting their chucks to a ShopSmith 5/8" spindle as well.

Turn 'em round,

Re: Spindle Adaptor

#6

Re: Spindle Adaptor

Thad Parker

>Thank you all for the help. I had never looked at Penn State's site before. It's exactly what I was looking for. Thanks again,

~ Thad

Re: Spindle Adaptor

#7

Re: Spindle Adaptor

Mike Nelson

>Got mine there. 19.95

Re: Spindle Adaptor

#8

Re: Spindle Adaptor

Jeff -- Bloomington Indiana

>I am glad you found the info for which you were searching ...

I have a Shopsmith and also got the PennState adapter and it works fine.

The thing I am looking for, which is in the same arena, is some kind of vacuum-chuck adapter for use on the Shopsmith (which does not have a hollow spindle on the headstock) ...

Any guidance would be appreciated greatly ...

Re: Spindle Adaptor

#9

Solid spindle vacuum chuck *LINK*

Rick Allen

>The only one I have heard of is the VacuuMaster chuck.

Looks like it works. The price doesn't compaire well with vacuum chucks that work with hollow spindles.


Link to VacuuMaster chuck