Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

WD-40 vs Pam

Posts

WD-40 vs Pam

#1

WD-40 vs Pam

robo hippy

>I was watching Bill Grumbine's new DVD, and saw him use WD-40 on his coring blades. While I doubt that there will be any remaining residue left by the time one is done with turning and sanding, I was wondering what else out there would work. I remembered what Duke (the guy who makes my bandsaw blades) said, and that was to use Pam (that spray on your pans for no sticking) on my bandsaw blades to keep the wet wood and sap, and pitch from sticking. Well, I figured that if it worked there, it would work on my turning tools. I sprayed it on all of my gouges and McNaughton coring blades, and it does make a very good lubricant. Of course there is the benefit of it being food safe too. It does help keep the build up of residue from wet wood to a minimum.

robo hippy

Re: WD-40 vs Pam

#2

Re: WD-40 vs Pam

Bill Grumbine (Kutztown PA)

>Not to mention, it is fat free (unlike that guy in the movie!) Good idea Reed, I think I may have to get a can for the shop.

Bill

Re: WD-40 vs Pam

#3

Re: WD-40 vs Pam

Chuck Engstrom

>I've put together a ~50/50 mix of canola oil ("active ingredient" in PAM) and chainsaw bar oil. I wipe it on in a bit of paper towel running the bansaw blade backward (with the power cord disconnected) before cutting green stuff. Seems to work pretty well, better than PAM alone.

Best--

Chuck Engstrom

Re: WD-40 vs Pam

#4

I LOVE WC

Dave Belser

>Man, it just keeps happening....

Lately I've been reducing a lot of wood to turning sized blanks with my bandsaw. There was a post about using a dremel tool for sharpening - and since then I've used the technique twice!

So now my blade is sharper and cuts well, except it keeps getting gummed up - presto-wham-mo - a post I about reducing/solving that problem.

There is definitely a psychic quality about WC. Tomorrow I raid the kitchen for canola oil :)

- Dave

Re: WD-40 vs Pam

#5

Keith Tompkins

Re: WD-40 vs Pam

Keith Tompkins

>You know, I ran out of PAM in the kitchen, so I decided to substitute some WD-40.....just kidding! That's a Good Idea! Just remember to scrape any buildup off the bandsaw tires, and make sure the oil doesn't affect the rubber.

TRUE STORY: I once loaned my 14" Delta bandsaw to a friend (I was young and foolish). I needed it back, but kept getting the runaround. So, I went to his house to retrieve it..AGGGHHH! He had been cutting venison on the saw, and the tires swelled to the point where they came off the wheels. Not easily discouraged, he simply tried to cut without the tires. I took the saw back, and he refused to pay for the damage, which was fairly extensive. Haven't seen the guy in 30 some years but still have the same saw.

Re: WD-40 vs Pam

#6

Steven Antonucci

HA HA HA HA HA

steve antonucci

>I have volunteered to "do things" for people just to prevent such issues...

I can just see the truck in your driveway with "your friend" trying to convince you to butcher the deer on the bandsaw:

him: "It'll be fine."

you: "No, it won't"

him: "why not"

you: "Um, I was sutting poison sumac with it when you pulled up...it's contaminated"

him: "durnit..."

Steve

Re: WD-40 vs Pam

#7

WD-40 MSDS (Kind of long)

James McClure

>I was just reading the MDSD for WD-40 after a couple of people told me that it wasn't a great idea to use it they way I was. I have been spraying a good coat of WD-40 (the bulk version in a spray bottle) on turnings before my final passes in order to achieve a smoother cut with less tear-out. I think I read that suggestion here. After deomonstrating and teaching this technique several times, I have had a couple of people warn me about breathing WD-40 fumes so I decided to Google up the MSDS. Here's a summary of what I read:

Breathing - May couse anesthesia, headache, dizziness, nausea and upper respiratory irration.

Skin contact - May cause drying of skin and/or irration.

Eye contact - May cause irration, tearing and redness.

So, while it doesn't sound like the deadliest substance on the planet, I decided to look for an alternative (at least for teaching and demoing situations). I have experimented with soapy water and it works pretty well, but not as good as WD-40.

Just wanted to put this out for consideration and you can use your own judgement about using it or not...

Re: WD-40 vs Pam

#8

Re: WD-40 MSDS (Kind of long)

Bill Howatt

>I may have posted this in the other thread but in case I didn't, mineral oil works very well and is non-toxic.